wed. jan 9th dynosourses raptor hp test

[jeff2]

my name is jeff garmon i own southern truck parts in

atlanta ga. we do engine and drivetrain upgrades,

and will doing some testing wed. i invite you to attend

and test your boxes on and off. it is a great test when your

on a dyno to turn your box off and on and see exactly what

the real gain is. jan. 9th north atlanta just off 120 loop 263 exit.



Edited "contact" info due to complaints. ~ Kat

 

[TORQUS MAXIMUS]

Jeff,
let us know the results of this box as I am very interested to see how it stacks up against the ez. If the ratings of the Raptor fueling module are even close(80 hp 300 lb ft) then I will definately be purchasing this item. I want alot of torque and this box seems to have it in spades. I'm not worried about horsepower. This box has a high torque to horspower ratio which is excellent for me. Let me know the results. -Ray-

 

[Jvann]

Jeff, thanks for posting this info. See you there.

 

[Stefan Kondolay]

Jeff,



I would love to be there, but it's just to far. It will be a good test. Let us know.

 

[Jim Nunn]

Dyno testing.......

I'll be there and take a test too.



Should be another blast at STP

 

[HVAC]

Hello Jeff

Please come around more often Jeff. I'm sure a lot of the dribble doesn't interest you but it would be interesting to get your take on the technical stuff.



The two diesel rodders I have respect for are "Smokin" Dave Mitchell and Jeff "The Dragster" Garmon!

 

[Big Don]

Is the Dyno Sources Raptor, just a rebadged PE EZE??? or is it a different box??? I ask, because BD sells the VA box as the "BD Plug'n Power" Just curious.



If it is different can someone explain. I checked out their website but all I could find was installation in structions (which look like they did a cut and paste to the power edge EZ installation instructions). No info on the "Raptor"



thanks

Don

 

[jeff2]

RAPTOR

THE RAPTOR IS A HACKED EZ EDGE BOX BY JIM AT DYNO SOURSES

IT WORKS GREAT!

 

[Alan Reagan]

Jeff, Good to hear from you. Hope to see you in Atlanta. Dang, that's a long drive. Take care. Thanks for the Raptor. I like it.

 

[redneckdr]

dyno day (night) 1/9/02

jeff, do i understand that the dyno event is in NORTH atlanta area off of loop 120, and NOT at the STP store? more specific directions? for those of us who may not be able to be there to watch the fun, please post the results, at least of the Raptor!

 

[KatDiesel]

Jeff -

Since you are a vendor, I am going to have to ask you to identify yourself as such in a signature, or you could have your user name changed to "comply" with the guidelines. I realized you said openly in your first post who you are, but with a signature it will state that with every post.



Also unfortunatly your not allowed to post direct contact info so I had to remove the numbers from your post.



Feel free to email me with any concerns or questions.

 

[redneckdr]

southern Truck Parts

i'm not the vendor, nor do i work for jeff... ... .

check out STP at http://www.dieselhp.com/

rest of the disclaimer... ... i know nuthin'. i sell nuthin'. that's my answer, an' i'm stickin' to it!!

 

[Diesel Freak]

well looky here

my $. o2



I would wager close to a 60 HP increase at 1800, and 20 to 40 hp increase at 2400 to 2700 over stock. Anything more and, well you know.

 

[Alan Reagan]

Looking at their HP curves, it seems as though the HP comes at the higher RPMs. I contacted them and they said they would have dyno numbers this month.

 

[Diesel Freak]

What were the test results?

 

[pwr2tow]

bringing this back to the top.

What were the results??



Ron

 

[fj40charles]

We're still waiting for the numbers. I wonder if the numbers were not good enough and they're not posting it.



Charles

 

[TxDieselKid]

what happen to 300ft-lbs???

TTT!



I was skeptical of the 300ft-lbs claim, and now it is being proven right by yall not posting the numbers. Come on guys.



Andrew

 

[Diesel Freak]

Come on ANdrew... don't be too harsh on them. It is only a CPC Box!

 

[TxDieselKid]

....tick.....tick.....tick....tick....

DF,



I call it motivation, to post the numbers !



Andrew