Westech dual gauge in SRT 10 pillar?

[fencebuilders]

Has anyone gone this route on gauge set up? I am wondering if the Westech fits in the SRT 10 pillar which i understand has a 2 1/16" opening. Any help appreciated. Mark.

 

[SRadke]

The hole is slightly larger than 2 1/16". I don't see any reason why a dual gauge would not fit as well as others. I have a DiPricol fuel pressure in mine and I had to put a couple wraps of electrical tape around the back of it to tighten it up a little (so it wouldn't rotate in the hole). Picture in my readers rigs.



-Scott

 

[Bertram65]

I have an Autometer EGT in mine, had to cut the hold in bracket so it was only one sided and used foam tape to cushion the side of the guage where the bracket could not be installed. Works great nice and tight.

 

[fencebuilders]

Good info fellas,you have any preference or hindsight on the night time background,i. e. white or black? Thanks.

 

[SRadke]

If you get a white background to match your dash cluster most will also match your dash cluster at night. The new DiPricol gauges are virtually a perfect match fo the stock gauges. I have no experience with the dual gauges, analog or digital.



-Scott

 

[Prairie Dog]

My Westach fits so snug in my Geno's pod that I didn't use anything to hold it in. It's been working great so far.