Here I am

Engine/Transmission (1994 - 1998) What plate is this?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission 98 12valve question

Engine/Transmission (1998.5 - 2002) Another bottle bracket

Status
Not open for further replies.
I removed the AFC housing and found that the torque curve plate that is in my truck has the number 24242 stamped on the top. What kind of plate is it?:confused: Thanks.
 
Wow. This truck is the fastest stock 12v I have ever driven. :--)

I know the injectors have been changed. Does that make that much difference? This truck runs almost as strong as my wifes Power stroke with a 50 hp chip.
 
chip

All 12 valves will run as strong or better than a power stroke, It is probally stock if it runs as strong as a powerchoke... I mean stroke:D
 
Injectors will make a difference.

Maybe the previous owner had the stock plate reground, too.

Was the tamper screw in place when you removed the AFC housing?

Where does your rpm max out?
 
Originally posted by JohnE

Injectors will make a difference.

Maybe the previous owner had the stock plate reground, too.

Was the tamper screw in place when you removed the AFC housing?

Where does your rpm max out?



Someone was inside before, that is why I thought the truck had an aftermarket plate. I took the stock plate off and did a seach, it looked stock acording to picturs of others I saw. The rpm start to taper off at about 2700. Thanks.
 
Well sounds as if a governor spring kit (GSK) is in your near future. A GSK install will really make the truck drive better.



Does it look if they slid the plate forward?

Was the AFc hosuing slid forward?

How about a boost elbow?
 
Originally posted by JohnE

Well sounds as if a governor spring kit (GSK) is in your near future. A GSK install will really make the truck drive better.



Does it look if they slid the plate forward?

Was the AFc hosuing slid forward?

How about a boost elbow?



Everything looks stock. Except for the injectors and the exhaust and other minor things.
 
Status
Not open for further replies.
Back
Top