Engine/Transmission (1998.5 - 2002) What pusher pump to use

[RonnieGilman]

I want to put a pusher pump on my truck but im not sure which one i want to get yet,so can every one gimme there two sense on what they think is the best system to go with,,,,,,,,I have a 2001 24 valve,,,,,,,,i also just got some rays banjo bolts from Genos,has anyone put these on and how do they work

 

[Sageair]

I relocated the factory lift pump and used the Vulcan big line relocation kit. So far, so good.

 

[RonnieGilman]

Where did you relocate it and where can i get the vulcan kit

 

[J.Keith]

Vulcan Kits Here



I am using a Holley Blue with a bypass regulator.

It's working well so far but I would like to put in bigger lines.

 

[IdahoJim]

My fuel pressure wa down to single digits when i installed the gauge last week. Today I installed a Vulcan relocation kit with the big hoses. Pressure is now 16 at idle, and I can't pull it below 14 even with heavy acceleration. Many thanks to all the smart people on this site... . you've all helped me a bunch.

 

[Eventer]

Ronnie,

I am using a Carter 4600 pusher pump that cost about 150 installed. I have 22. 5 PSI at idle, 18. 5 at cruise and 11 on full throttle. The only downside (?) is pump noise prior to start and a slight hiss that I can hear over the engine at idle with the windows open.