What to do now.

[DMalone]

Well guys my truck is two years old now and i need to make some changes. I would like to have some more power. But i dont really want to put a new clutch in. To date i have never slipped the clutch and i am running a EZ. I either am used to the power on the ez, or it is not working like it did when it was new. I beleive i am use to the power i have. Question what mods needed? Which injectors should i look at. Anybody have a good set up. I have tryed to use the search but i never can get the thing to work. I really only pull loads 7 or 8 times a year. I do pull a big load in the fall, lots of mules tack and gear. I am thinking from what i have read here over the last couple of years that injectors is what i need, but which ones and whats the ballpark HP gain. I would like to thank all for the help and knowlede over the last years. Is one type of injector any better that another? Where in ok could i take my truck for the upgraded injectors install. Thanks

 

[willyslover]

ANY mod you do at this point WILL cause the clutch to go away... the ETH has a very week clutch... if you only want a small amount of power increase go with 275's. . but if you want a little more go with DDII's... in any case you'll have a clutch soon. . I might suggest thet you look into Peter's at SBC.