What turbo S300?

[TJarecke]

Is there a way to know who built a turbo, which one it could be, etc. ? I have a wastegate disabled S300 turbo that I bought about a year ago and have yet to use. I was told that it was a Big Woof turbo sold through Bully Dog. I was also heard that these turbos were built by HTT. Any truth?

Is there any markings I should look for and where they should be?

No a/r or name on the compressor side

No TAD stamped on the turbo

No tag on the turbo

As far as I see it I will have to send it to HTT or someone else to have them look at it to tell me for sure.

Any help,

Thanks

 

[Tomeygun]

Is there a way to know who built a turbo, which one it could be, etc. ? I have a wastegate disabled S300 turbo that I bought about a year ago and have yet to use. I was told that it was a Big Woof turbo sold through Bully Dog. I was also heard that these turbos were built by HTT. Any truth?

Is there any markings I should look for and where they should be?

No a/r or name on the compressor side

No TAD stamped on the turbo

No tag on the turbo

As far as I see it I will have to send it to HTT or someone else to have them look at it to tell me for sure.

Any help,

Thanks

MIght be a good idea anyway to make sure it has a clean bill of health before you start honk'in on it

 

[jwilliams3]

Post a picture of it.

 

[TJarecke]

Here are some pics.

 

[jwilliams3]

Definitely looks like an S300 with a 12cm turbine housing.



I am not 100% sure on the compressor wheel size but it looks to be a 62mm or smaller.

The turbine wheel looks to be 60mm at the exducer.



Having HTT go through it could not hurt!!

 

[Forrest Nearing]

I'm betting it's an s300g.



a definate step down from your hx40