what twin setup?

[TurnerN]

fueling mods include tst/smarty (whenever it gets here), ddp 100hp injectors, stock cp3, eventually stage 1 from floor it or relentless, con fe eventually dual disc, fass 200. i want a set thats gonna do real well off idle till about 3800, (if smarty eliminates rev). your guys input will be very helpfull. thanks



im looking at the artic air setup from relentlessdiesel.com

tell me what you think of that and the cp3 mod they have.

 

[mattymac]

I would say to go bigger than a 3B/stocker, b1/b2 or S300/S400. They will be a bit slower off idle than the relentless setup but I think without nitrous youll be EGT'ed out. What do you want to do with the truck?



As for the CP3 I like the RD setup because it doesnt raise pressure it just maintains it better but its a more involved install unless your putting in a cam then your already that far apart.

 

[TurnerN]

it might sound funny me having a six speed, but i want to drag a little bit with it, (basically beat/smoke the ricers), daily driving, light sled pulling. you do bring up a good point about the cam.

 

[WUnderwood]

do you want a bolt on set, or do you want to make a set?



the ATS twins are good, for a off the shelf set



hope this helps

 

[TurnerN]

well i could build a set, but was hopeing for something off the shelf. i kinda wanted to try the rd setup abd modify my stocker. but im not sure what to do

 

[mattymac]

If you want to drag race it check with banshee here. He has a 12 second 3rd gen 6spd!



As for the ATS twins they are a good well thought out set but there have been mixed reviews about spoolup with them here and on DTR. The BD twins seem to be good for 600+ HP with fast spooling but in sept. they are going to have a bigger setup available. Olee Poole www.powerbypoole.com builds some extremely nice kits with a few diffrent charger options. There are many more combos out there with tons of info. Do your homework and build the kit around your intentions and HP.

 

[TurnerN]

what is the dodgezilla turbo, looks awsome. they have some pretty nice setups. but what would you guys think if i used a b2 or s400 on the bottom and modifyed my stock turbo? what could be done to modify. im trying save a little cash right now. i know this might not the kind of stuff to scrimp on, but $ is kinda tight. maybe later go to an s300

 

[mattymac]

what is the dodgezilla turbo, looks awsome. they have some pretty nice setups. but what would you guys think if i used a b2 or s400 on the bottom and modifyed my stock turbo? what could be done to modify. im trying save a little cash right now. i know this might not the kind of stuff to scrimp on, but $ is kinda tight. maybe later go to an s300

Get ahold of nathan wright, (IdahoCTD) here. He builds setups that use a B2/stocker with an external WG and blow off valves, lots of adjustability. Nice set up too. There was one of his kits for sale in the classifieds not to long back. Also DTT is selling his kits.

 

[TurnerN]

that sounds like just what im looking for, il send him a pm