Here I am

What was that Part Number for....?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

More Cruise Control Woes

Overdrive problem

Status
Not open for further replies.
Serpentine Belt Tensioner - Dayco #89219





I'm always searching previous posts to find a number that I should have written down. This could be a database for just that. If you need someone to keep it in order, I'd be glad to help. This search just saved me about $60. 00.



Perhaps there's a better title.
 
Here are some more part numbers to add to the thread:



*Raybestos 314PG - 3" rear shoes



*Raybestos WC36057/WC36058 - wheel cylinders for conversion to 3" brakes



*Timken 417158 - Rear axle seals



*Cummins 3963983 - Washers for lift pump line to manifold



*Raybestos 76025 - Front brake rotors



*Hughes 15XFM - HD tow torque converter for 727/A518



*Dayco 70001 - Moulded 90* heater hose (several required;))



*Dayco 71594 & 71595 - Upper and lower radiator hoses
 
Last edited:
Phil, I think this would be a great thing to have! I have a few PN's that I was wondering where to put them so others could use them.



Crank position sensor Dodge # 04746691

Front crank seal kit Dodge #05012290AA

Front crank seal kit Cummins #3804899



I have some more, will need to dig out the invoices for them.



Stan
 
These are the only ones I have handy right now-



BHAF Big Honkin' Air Filter) Fleetguard- AH19037

Napa- 2790

Donaldson- B105006



Stratopore oil filter- LF3894

Microglass oil filter- LF3552

Fuel filter- FS1232



16cm exh hsg- Cummins 3521927



3000RPM gov Spring- Bosch 1-464-650-366



Updated (1995 and up) flexplate- Cummins 3946161

THis is supposed to be a direct bolt on fit.



Fuel supply line to VE pump (the one that gets twisted every time you try to remove the pump) Cummins 3918641

NOTE- the later models have a different shape/routing around the throttle, but they will bolt on just fine.
 
Last edited:
Fan Shroud- Mopar(?) 52004276 I think this is from the later, intercooled trucks. It is the number on my now 2-piece shroud anyway.



Thermostat- Cummins 3802968



-DP
 
Here are some more- (p-n are Cummins unless otherwise noted)



Thermostat- Cummins ------------3802968

Thermostat housing (intercooled)- 3920353

Throttle rod (complete- i/c)-------4089076

front timing cover gasket----------3914385

Front main seal-------------------3804899

Cam follower gasket---------------3990732

Rear main seal=-------------------4089342

Vacuum Pump sseal kit (~$7. 50)---4089742

Heater hose elbow (Gates)---------20388

Turbo oil supply line----------------3912747

Piston style lift pump (VE) ---------3936320

Fan hub assembly------------------3923004

fan hub bearing--------------------3910734

WIndshield Wiper bushings (HELP!)--49440
 
Last edited:
Valve cover w/oil fill - 3928405

Oil drain plug washer - 3920773

Intake cover plate gasket - 3938152

Grid heater gasket - 3938158

Valve cover bolt o-ring - 3928406

Valve cover gasket - 3930906

Turbo oil drain gasket - 3937706

Exhaust manifold gasket - 3929881

Oil fill cap - 3901895

B Series tool kit - 3399869

Cummins screwdriver kit - 3400161

Non cycling thermostat - 3802968

Piston lift pump and parts needed for conversion:

- piston lift pump - 3936320 x1

- fuel line - 3914753 x1

- gasket - 3939258 x2

- spacer - 3914284 x1

- banjo bolt seals/washers - 3918191



-------

89-91 Non-intercooled fan shroud - 4428173 - Mopar

Axle vent breather/cap - 4213328 - Mopar

Fan clutch for 89 (other years?) 52006096 - Mopar
 
Went to Cummins Cal Pacific today for a new thermostat.

Well here is the new part # for the thermostat #3972071

This number replaces part #3917324



Doug
 
Fuel filter stud for use without fuel heater Cummins # 3925954

Fuel filter without drain FF5018



Brian
 
Last edited:
Turbocharger to exhaust manifold gasket 3901356

*New* Front crank oil seal kit 3937111 - previously 3804899 $27. 90

Front crank seal AND wear sleeve kit 3802820 $83. 23:eek:

Banjo bolt/seals for injector return line (horseshow copper washers) 3903380

Square cut retangular rings/seals goes top of injector hold down nut 3909356



Of course with your engine serial number, any part number can be found via your local Cummins distributor:D.
 
Status
Not open for further replies.
Back
Top