Attention: TDR Forum Junkies 
Hello to all!
My brother has a 98. 5 2500 FWD which seems to be having some rear Driver side Wheel cylinder problems. They occurred about two months ago. It started when the breaks would grab every time they were applied. So, after getting the wheel off, he found the old cylinder had failed and break fluid had leaked all over the inside. Well, it has started this again within the last week or so, on the same wheel. What would cause these cylinders to keep failing? Are they poor quality, or is their something else that needs looked at? Thanks in advance for any advise!!
Mark
My brother has a 98. 5 2500 FWD which seems to be having some rear Driver side Wheel cylinder problems. They occurred about two months ago. It started when the breaks would grab every time they were applied. So, after getting the wheel off, he found the old cylinder had failed and break fluid had leaked all over the inside. Well, it has started this again within the last week or so, on the same wheel. What would cause these cylinders to keep failing? Are they poor quality, or is their something else that needs looked at? Thanks in advance for any advise!!
Mark
