Wheel Hub at 32K

[SnoKing]

As Cummins12V98, it appears RAM puts in to much toe in, causing the outside wear. No one commented on his post. Snoking

 

[AfterBurner]

If it's toe in why would the dealer put a new wheel hub on?

 

[SnoKing]

If it's toe in why would the dealer put a new wheel hub on?

Because that is RAM's spec that wears tires on the outside edges. Snoking

 

[Cummins12V98]

My 15 has the exact same issue. 1/4 toe is spec it should be 1/32. They want these trucks to track straight.

 

[AfterBurner]

Truck is at dealership now. So they set toe to 1/4 on the right front? Is this to compensate for road crown?

 

[SnoKing]

Truck is at dealership now. So they set toe to 1/4 on the right front? Is this to compensate for road crown?

No that is so that your tires will still wear! RAM says 1/4" so tech set it at that. Listen to what cummins12v98 is saying, and have it set to 1/32-1/16 if you want wear issue resolved. Snoking*

 

[Cummins12V98]

I know these things.

 

[shorthorn]

ditto... my '14 does the same thing... going to talk to an alignment shop this afternoon to set to the lower spec as referenced by cummins.

I had mine into the dealer under warranty as well for the issue... they checked everything including alignment and stated its "in specs"... Their spec's are wrong.

 

[Cummins12V98]

No their specs are correct for what they are trying to obtain, straight tracking!

I just wished I had my 15 aligned right away. I was hoping with the new front suspension it would have been better. NOT!

 

[AfterBurner]

Dealer said toe was out. Maybe some people on here do know what they're talking about!

 

[SnoKing]

Dealer said toe was out. Maybe some people on here do know what they're talking about!

Never! SNOKING