Wheel Question

[sack]

I just dropped some mad bucks on a kore suspension and as you can imagine it may be hard to drop the same on new weld wheels. Just wondering if anyone knows if there are any other wheels out there (perferebly non-chromed) which fit the OEM offset and backspaceing.

Thanks!

 

[JCleary]

So far I think the Kore Welds are it. I looked around before buying mine with no luck.



After a bad experience with my 2001 Land Cruiser (installing non-hubcentric wheels with slighty wrong offset) I decided I would never do it again. Imagine a $60k luxury sport utility with Death Wobble. It sucked, I returned the rims.



Go with the Kore Welds, or use the stock rims with 35's or 315's. It's not worth throwing your money away on inferior products when you already have the BEST truck with the BEST quality suspension system.

 

[Punkineater]

So far I think the Kore Welds are it. I looked around before buying mine with no luck.



After a bad experience with my 2001 Land Cruiser (installing non-hubcentric wheels with slighty wrong offset) I decided I would never do it again. Imagine a $60k luxury sport utility with Death Wobble. It sucked, I returned the rims.

Wheel offset doesn't cause death wobble only exaggerates it when it happens. I've done 4. 5" backspacing and 35's on every Dodge I've owned and never once had death wobble. Never fried a wheel bearing either. That's 3 2nd gens and a 3rd gen runnin.

 

[Bertram65]

I just dropped some mad bucks on a kore suspension and as you can imagine it may be hard to drop the same on new weld wheels. Just wondering if anyone knows if there are any other wheels out there (perferebly non-chromed) which fit the OEM offset and backspaceing.

Thanks!

Could always use H2 wheels.

 

[sack]

H2 wheels fit pretty well then? I'm thinking of just sticking with my stock wheel, I have the cast ones so they're solid enough I would think until I can get enough money for the real deal.

 

[JeepinDoug]

The H2 wheels will fit after you open up the hub bore.

I just got a brand new set on eBay for $150.

 

[DJaquez]

I just received a new set of OEM Chrome Hummer Wheels for $400 delivered. Boring will cost $35. 00 per wheel.



Oo. I have a machinist that is going to make some custom covers for the lugs that will fit to replace the Hummer insert. I have asked for the Ram to be machined into the cover.

 

[Ereynolds72]

I've done 4. 5" backspacing and 35's on every Dodge I've owned and never once had death wobble. Never fried a wheel bearing either. That's 3 2nd gens and a 3rd gen runnin.

Wanna buy some wheels?

 

[Punkineater]

Wanna buy some wheels?

If they're 20" and 12" wide I'm interested.

 

[sack]

I'd love to see a pic of those when they're all done and on the truck if you get a chance!

 

[Matt400]

I have a machinist that is going to make some custom covers for the lugs that will fit to replace the Hummer insert. I have asked for the Ram to be machined into the cover.

Gotta know who that dude is! please PM me.