Attention: TDR Forum Junkies 
2010 Ram 2500 6.7L
42k miles
I started the truck up yesterday and was blessed with ABS, BRAKE, and SERV 4WD lights. I plugged in a scan tool and I have an intermittant C103D code, rear wheel speed sensor fault.
I took a trace while driving around and both rear WSS are dropping out intermittantly, exactly mirroring each other. IMO This indicates that I do not have a bad sensor on only one side. I guess this points to wiring, but why would both wires be dropping out at the same time? Anyone know of a common wire pinch spot that would catch both wires to start looking before I crawl under there?
Thanks!
42k miles
I started the truck up yesterday and was blessed with ABS, BRAKE, and SERV 4WD lights. I plugged in a scan tool and I have an intermittant C103D code, rear wheel speed sensor fault.
I took a trace while driving around and both rear WSS are dropping out intermittantly, exactly mirroring each other. IMO This indicates that I do not have a bad sensor on only one side. I guess this points to wiring, but why would both wires be dropping out at the same time? Anyone know of a common wire pinch spot that would catch both wires to start looking before I crawl under there?
Thanks!
