Here I am

Wher Do I Put A Fuel Gage

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

High EGT's - Best Solutiuon?

2005 Lift Pump

Status
Not open for further replies.
Hi Gang, I have a 03 Ram Diesel 4X2 Automatic Laramine Black inside with white Instruments. . I'd like to get a Fuel pressure gage hooked up to the Fuel Filter and put the gage inside the Cab somewhere... Now i don't want to put more than just this one Gage in the Cab... Where would you suggest i mount it?? of Coarse i haven't purchased a Gage yet. So i'm open for suggestions as too (What Brand Gage) to purchase??? Can you help me out here?? Thanks to all of you and Have a Great Thanksgiving. . Don't forget our TROUPS?????? Radar Doctor
 
If I read your post correctly, the ONLY gauge you will have is a fuel pressure gauge? If you only want 1 gauge, get the A pillar from Geno's with the gauge pod built in
 
I have a 4. 5 and will be picking up the following to put the Fuel guage on my truck. I am not sure if your 03 has the beige color pillar. The pillar is from DodgeSRT and keeps the handle and has a single opening for a guage. It sounded like others had done this and it worked out well. i liked the idea of the pillar color matching without painting and keeping the handle for a more stock look. Genos has been very good to deal with on some other purchases I have made and will probably be using them for this add-on. You can drop genos a call or email and they will confirm the proper part numbers for your year vehicle. The kits for guages come with everything you need to get the guages installed and running.



Good Luck.



http://www.genosgarage.com/



LT-FFCPP - Fuel Filter Cap With Fuel Pressure PortID #: LAHF-FL18

Dipricol Guage

ID #: DI-030FPG-W

Pillar mount

ID #: GM-DG-ZL39TL2
 
radar doctor,

You said "NOW",so I'll assume that there is a later for other options ! You can't go wrong with the A-pillar single. When later comes,the cubby hole mount is a real practical peice and the windshield pod is very promising also. BTW,I used the tapped banjo bolt on the bottom of te fuel filter bowl using a "TEE" so I can drain the bowl during filter changes. Don't like the crud falling back in the bowl when extracting the used filter :confused: :(
 
Status
Not open for further replies.
Back
Top