2nd Gen Non-Engine/Transmission Where do I get new polyurethane bushings for my 4x4

[Silver Bullet Ram]

2001 2500 4x4. I need new bushings for the trailing arms, not the track. I want to use polyurethane.



Gary

 

[Andy Redmond]

Energy Susp makes a kit if I remember correctly. Rancho did? But now I think they only have inventory of the upper and lower trailing arms with their urethane already installed.



Measure one and then match up by size?



Energy Sus had such charts in their catalogs.



Good luck

Andy

 

[JSellers]

Gary,



I've seen replacement bushings for stock control arms somewhere, but I can't seem to find the specific page. There are probably several vendors who make or sell them, but one sticks in my memory with a photo of the OEM arms and replaced poly bushings. Daystar is mentioned on the Rocky Mountain suspension site (www.rockymountainsusp.com), and I'm sure others have them as well (like Andy mentioned). You might consider the entire replacements also, like DT Profab makes.

(see http://www.dtprofab.com/dodge.htm)



I also want to replace my control arm bushings, but I don't want to lose ability to adjust camber. I don't yet know if this will be an issue with replacment arms or not.



Good luck,

John

 

[nfox]

Control Arm Bushings

There is a place called mako manufacturing that sells poly urathane bushings cost is around $90. 00 and $12. 00 to ship, i think they sell on ebay too.