Attention: TDR Forum Junkies 
Yikes, some of these gauge components are hard to locate. I spent couple of hours, finger walking and web searching, trying to find the Autometer 3 gauge dash pod hoping that someone miight have one on the shelf. Now the Westach 0 -16 psi fuel pressure gauge is on back order where ever I inquire. Isspro agreed to look into putting out a gauge to meet our needs if there was enough interest. I bought the Isspro boost and pyro gauges. http://isspro.com/aftermarket.html
Anyone have some ideas where I might find these items?
Getting ready to leave in a couple of weeks for the east coast to do some sight seeing and would like to monitor the lift pump along the way, given how fragile they are.
On another subject,, I had a nice 50 gal. aux. tank built at Centralia Supply in Centralia Wa. for $380. size is 60 X 23 X 9, 11 gauge steel. It cost an additional $100. to powder coat and the apperance is more to my liking than the alloy tanks. To this I added a 12 micron spin on filter w/ water drain. Total for whole thing under $550. Hoping that pre filter will prolong life of OEM filter and pumps.
Anyone have some ideas where I might find these items?
Getting ready to leave in a couple of weeks for the east coast to do some sight seeing and would like to monitor the lift pump along the way, given how fragile they are.
On another subject,, I had a nice 50 gal. aux. tank built at Centralia Supply in Centralia Wa. for $380. size is 60 X 23 X 9, 11 gauge steel. It cost an additional $100. to powder coat and the apperance is more to my liking than the alloy tanks. To this I added a 12 micron spin on filter w/ water drain. Total for whole thing under $550. Hoping that pre filter will prolong life of OEM filter and pumps.
