Where to install pyro sensor pre-turbo??

[gdbontly]

I would like to relocate the Pyrometer Sensor on my BD X-Monitor from post-turbo to pre-turbo. But I don't know exactly where to install it. I took some pictures and posted them on a temporary page on my web site at http://www.webejeepin.com/Temp.htm

 

[RankRam]

I installed my X-Monitor pyro and had no problem with clearance. If you want to see my location for pyro just click on my Readers Rigs photos. It's in the mods album.



The location that I tappped is monitoring cylinders 4,5,6, they are the hottest so I've been told.

 

[kboettcher]

The probe on your pyro is adjustable... ... . just loosen that top nut and pull out on the probe... it should slide in the ferrell(sp) then tighten the nut back down when you have it at the lenght you want.

 

[gdbontly]

Excellent! Thanks! I'll try that this weekend!