Which Hitch

[Dreamer]

I'm looking for a dual pivot non slider hitch that will bolt on my 2005 Dodge without drilling holes in the frame. Any ideas ? Not looking for an expensive air ride unit as I will likely upgrade the pin box if necessary. The important feature is NOT drilling the frame.

 

[Wingate]

Have you looked at a B&W?

 

[Dreamer]

Have you looked at a B&W?

I'm sure they are great but here in Canada it looks like they run $1000 plus. Over my budget limit.

 

[Slow Six]

My Reese Elite has a frame that goes under the bed and clamps on to the frame. It is a very strong set up. When the hitch is removed the bed is clear however this hitch blows your budget. I don't think you get the set up you want for low bucks unless it is a poor hitch. When I got a hitch for my 03 there were some brackets available that bolted on using existing holes. I have never compromised on a hitch as I do not want a failure.

 

[HBarlow]

Check etrailer.com.

 

[Bob V]

Here is a Curt no drill kit that allows the standard mounting rails for 5th wheel hitches. Check out Craigslist for a hitch. I see them all the time at good prices. I paid $150 for a Nice 20,000lbs dual tilt Reese hitch that was like new off Craigslist
http://www.etrailer.com/Accessories...tml?feed=npn&gclid=CPH-6cH5lbgCFS9dQgoduyIA3w
Reese kit, I don't know anything about this set up. Had the Curt style on my 2005.
http://www.americanrvcompany.com/Re...all-Brackets-No-Drill-Dodge-Camper-Trailer-RV

 

[Bob V]

Here is a Curt no drill kit that allows the standard mounting rails for 5th wheel hitches. Check out Craigslist for a hitch. I see them all the time at good prices. I paid $150 for a Nice 20,000lbs dual tilt Reese hitch that was like new off Craigslist

http://www.etrailer.com/Accessories...tml?feed=npn&gclid=CPH-6cH5lbgCFS9dQgoduyIA3w

Reese kit, I don't know anything about this set up. Had the Curt style on my 2005.

http://www.americanrvcompany.com/Re...all-Brackets-No-Drill-Dodge-Camper-Trailer-RV

 

[HBarlow]

SouthWestWheel.com is a good source for Curt hitches and many other trailer towing products.

 

[Shadrach]

Have you checked out DSP? They are made in Western Canada and are available at places like Gregg Dist. I have used their products many times, but not a fifth wheel set up so you would have to contact them first. David

 

[Bob V]

Here is a set up that under $300

http://seattle.craigslist.org/oly/rvs/3914141061.html



And a hitch

http://seattle.craigslist.org/kit/pts/3904218739.html

 

[Dreamer]

Thanks for all the suggestions. I found a hitch on Craigslist in my home town for $285. 00