Engine/Transmission (1994 - 1998) Which plate will equal my 24V w/ PowerEdge?

[243]

My 99 24V 5spd made 282 hp and 495 ft-lbs on the dyno. Which plate will provide equal power with a 215 hp 12V 5spd?



Thanks, 243

 

[SlyBones]

http://www.piersdiesel.com/CamPlate.htm

 

[243]

Thanks for the link, I've seen the chart and a similar one on TST's site... is it flywheel or dyno hp/tq?

 

[JJW_ND]

The #11 plate is pretty commonly installed in 5sp manual. This plate will dyno right close to 300 rwhp even in conservative setting. By adjusting the position of the plate (cost is free) you can get allot more HP. I did 350 with just plate, no injectors, factory turbo.



jjw

ND

 

[243]

jjw~



Are you running the stock clutch?



Thanks, 243

 

[C Schomer]

Mine did 292/812 at 6200' with a slightly modified 11. My clutch does fine here but will slip when I go to the midwest. Craig