Engine/Transmission (1998.5 - 2002) Which wire to tap for a lock up switch?

[TurboTweaker]

getting ready to put in a lock up switch, and I was wondering which wire i tap and how to wire the switch. any help would be great. Thanks TDR!



The Fat Kid

Andy

 

[DieselMinded]

http://www.dodgedieseldatabase.com/mystery_switch.htm



DM

 

[V Baker]

Try here, http://www.tstproducts.com/Torque Converter Lockup Switch.pdf

 

[TurboTweaker]

Thanks a lot guys. i'll get right on it



The Fat Kid

Andy

 

[CumminsAholic]

Thanks for asking the question Andy. I was just going to do the same thing. Must be getting ready for the dyno? You just going to ground the orange wire with a switch?

Corey

 

[Rattlin_Ram]

so a question about how these work. If you use the 3 pole switch does that then give you 3 positions, lock, unlock, and stock setting?

 

[TurboTweaker]

you are correct RR. you have lock, unlock, and stock settings

Cory, yea im just going to ground the orange wire.



The Fat Kid

Andy