which wire?

[Reb.B]

Which wire do i cut to stop the defueling process at top end speeds. I would like to get the truck faster than 115mph. Also not sure where the wire is located at. I have an anti defueling box that hooks up to the map sensor now, but i think this other problem is linked to the speedometer. thanx, reb

 

[Blkdawdg]

it's the orange wire with a white tracer

 

[Reb.B]

hmmm, i heard thats its on one of the two connectors above the drivers side of the motor. I see orange, orange, one w/ blue and the other with black. The only one with a white strip is red, and its a larger wire. still not sure which one to cut, or if i'm looking in the right place, thanx again, reb

 

[Bigsaint]

Another memeber cut that wire (OR/WT) and had a problem with stalling when off idle. His solution was to add a in cab toggle so that he could switch bewtween the two, depending on his needs. Just something to be aware of, I have not tried this. The wire should be in the harness, right above the valve cover.



Scott W.