White face overlay is installed!!!!!!!!!

[ToolManTimTaylor]

Couple Notes on Install. 1; Watch those needle stops (Thank god My eye caught it and it didn't hit the floor) They will go sailing!

2: I quite simply Had kept the truck at normal temp Juuust before removal of the cluster. I swapped the faces and re installed the cluster with no needles. Started the truck and waitded a few minuteswith the exh brake on and GENTLY positioned the needles where they should be for my truck at temp that I had marked down moments before. Confirmed position and snugged em in.



Sorry for the dudty rig.





#ad


#ad


#ad


#ad

 

[KatDiesel]

ToolManTimTaylor -



Did you get the white or silver background?

 

[ToolManTimTaylor]

.

 

[ToolManTimTaylor]

Eric, they are white however the camera I used seemed to have a color issue the more I look at the pics.

 

[KatDiesel]

Originally posted by ToolManTimTaylor

Eric, they are white however the camera I used seemed to have a color issue the more I look at the pics.

Thanks, thats what I thought but jsut wanted to be sure.



I'm going silver and hoping it matches the UltraLites They should be waiting for me by the time I return from Las Vegas.



The silver doesn't show up well in Dan's pic, so I will post some when i recieve it.

 

[Diesel Dan]

TMTT,



Looks real good. I am glad the install went well. Please give everyone your impressions. Both good and bad. Is it what you expected? Do you recommend it to others etc... Your fellow rammers need third party feedback.



That little bonus was nice wasn't it.



Best regards



DD

 

[nblack]

Thanks to DD for his work in getting the gauge face overlays done. I got mine on Fri. Installed on Sat. It was exactly what I wanted/expected. Nice quality piece.



Install was very quick and easy. Great instructions. 1/2 hour start to finish. Just follow instructions step by step. Pretty straight forward. Watch those needle stops! They're real easy to lose.

 

[KatDiesel]

ToolManTimTaylor -



Can you snag some night pictures, I am sure many people are curious what they look like at night. My set should be here by the time I get back from May Madness.

 

[ToolManTimTaylor]

Originally posted by KatDiesel

ToolManTimTaylor -



Can you snag some night pictures, I am sure many people are curious what they look like at night.

Gimmie oh say 2 Hours and I will (Pulling Wire as we speak While Typing is hard).



Double D I will fire up some Info on the install asap.

 

[ToolManTimTaylor]

#ad


#ad

 

[ToolManTimTaylor]

Originally posted by ToolManTimTaylor

Couple Notes on Install.



1; Watch those needle stops (Thank god My eye caught it and it didn't hit the floor) They will go sailing!





2: I quite simply Had kept the truck at normal temp Juuust before removal of the cluster. I swapped the faces and re installed the cluster with no needles. Started the truck and waitded a few minuteswith the exh brake on and GENTLY positioned the needles where they should be for my truck at temp that I had marked down moments before. Confirmed position and snugged em in.

As I started to put up before Yeah the install is a snap. If anything I feel it was the easiest White faced anything I have done yet! And that includes Bikes , Cars , Trucks and one Sled. My Mustang being the worst but thats a whole nother issue.



The A/C Panel will prolly give most of us a hard time as I can see it being the most evenly contact cemented on out of the three panels. So make sure your thumb is ready to rub. #ad
Theres alot of surface there for the adhesive to stick so that's why I say that.



The Gauge cluster itself is pretty much only glued around the needle openings ..... However that won't let you off that easy. Kep an X~Acto knife handy as it is easy to pick off the reminents of the prior facia. MAKE SURE YOU GET OFF THE OLD BITS THAT ARE LEFT! Bumps underneath can ruin what should be an easy and perfect install.



Reeaal Easy here folks. Like I said above watch out for those needle stops they will take off and dissapear on you if you are not careful. And pretty much keep the truck running the whole time you are taking off the panels right up to the moment that you are about to pull the cluster. That way you are limiting the down time for pressures and temps to drop off.



Theese clusters DO NOT have a speedo cable to deal with so no need to fret on that.



Hope this helps and any Q:s Feel free.



TMTT #ad

 

[Jamie Attridge]

Their Here Their Here

 

[DieselPuter]

?????????

Can someone tell me how to post a pic so I can show the black background and flames. I tried to get one of the flames at night but they all turned out badly, it will give you and idea of what it looks like. I can't say enough about how much I love it!!!!

 

[benhall]

I have mine now. Just have to wait 8 months till I can instiall it.



Ben

 

[Diesel Dan]

TTT

 

[Diesel Dan]

Got order from??????????

Hey guys,



I got today a UPS overnight letter w/ a cashiers check drawn on a bank i Danville, Kentucky. Them man left his name(private info) but did not leave a address to send the overlays to. Whomever you are send ma a e-mail w/ your address so i can ship asap.



-- email address removed --



Best regards



DD

 

[Diesel Dan]

Keep the orders coming guys and gals,



Remember this is a limited time offer at less than retail price. When i run out the price goes up to retail.



Best regards



DD

 

[Diesel Dan]

Hello Friends,

Anymore feedback on these now that you have had them on a while? I sure enjoy mine.



Thanks



DD

 

[KatDiesel]

Still sitting in the box, but they do match the AutoMeter Ultra Lites pretty closely, which is what I was hoping for. If I get time before work they are going in on Sunday.

 

[ToolManTimTaylor]

Gotten many a "Sweet setup' comments from it. The one thing I suggest is to check ALL your bulbs the night PRIOR to install ast then when you pull the clucter you can replace 'em at that time.