Competition Who has dynoed 800+RWHP on stock crank, rods, pistons?

[Jim Fulmer]

Come on now, stock pistons, stock rods, and stock cam. I know the cam wasn't on the list, but still?



. . Preston

And yes mine was with a stock cam... ..... there not that bad!



Yes, all of the Vegas numbers are corrected except the ones I told you about with me. 699 #2, 748 With water... ..... that is uncorrected. Hot day but nice shop temp, Vegas is at 2000 ft!



Doug did 886 with N2O like I said... ... ... that was fall of 03' when I was in Canada at Piers's. I'm sure I'll quit and sell out before I reach that number.



Jim

 

[HOSS]

I believe Nowel made over 800hp at Vegas with a stock bottom end and a ton of nitrous with the Red Rocket. Did he not????

 

[Jim Fulmer]

I believe Nowel made over 800hp at Vegas with a stock bottom end and a ton of nitrous with the Red Rocket. Did he not????

I think Joe D. said 785 at M/M 03'



Jim

 

[GO 4LO]

Doug's 886 was corrected, right? 912 uncorrected, I think?



Chris

 

[Jetpilot]

Chris,



You are correct the corrected number was 886 RWHP, the uncorrected number was 912 RWHP. I am thinking with the right mods 800 RWHP is going to happen with a VP truck sometime.....



Doug

 

[Bandit1]

is that a hint doug?

 

[CLiberty]

If I dyno my truck 4X and add it all up does it count??? ))

 

[rockjeep73]

Chris,



You are correct the corrected number was 886 RWHP, the uncorrected number was 912 RWHP. I am thinking with the right mods 800 RWHP is going to happen with a VP truck sometime.....



Doug

So were these numbers with a P-pump? 24 valve?

 

[Jim Fulmer]

So were these numbers with a P-pump? 24 valve?

P-pump and huge injectors.



Jim

 

[Jetpilot]

So were these numbers with a P-pump? 24 valve?

P-pumped 24v, huge injectors, lots of timing, and a little nitrous



Doug

 

[Turbo Thom]

Jim... ... ... ... . that is impressive. Good numbers.



. Everybody... ... ... . Leave off the nitrous. Now where are we?

 

[Jim Fulmer]

Jim... ... ... ... . that is impressive. Good numbers.



. Everybody... ... ... . Leave off the nitrous. Now where are we?

I'm going to try a few more things then I might just quit and sell out, we'll see. This has been an expensive and frustrating year.



Jim

 

[DRAG DIESEL]

I'm going to try a few more things then I might just quit and sell out, we'll see. This has been an expensive and frustrating year.



Jim

Yeah, TDR needs to start charging you by the post, Mr. Horsepower :-laf

 

[lmills]

P-pumped 24v, huge injectors, lots of timing, and a little nitrous



Doug

little nitrous.

 

[Timbeaux38]

Jim... ... ... ... . that is impressive. Good numbers.



. Everybody... ... ... . Leave off the nitrous. Now where are we?

I know what a certian truck did about 20 yards from your shop yesterday Preston... ... :-laf :-laf



That # Was BIG :--)

 

[Turbo Thom]

There just ain't no secrets anymore. He did spray a little water though. Still ain't bad for a washing machine mechanic, huh. :-laf

 

[Timbeaux38]

Not too shabby at all I must say... And as for secrets, I just hear alot more than your average bird :-laf :-laf

 

[edgerat]

I know that DonM just reported making near 800hp with a vp44 truck today!

 

[Jim Fulmer]

Cool, maybe they'll bring it to the D/FW dyno event!



Jim

 

[RacinDuallie]

I got info that a certain truck WILL be at the Fall Brawl that has dynoed DAMNED CLOSE to 800 with a weakened VPOo. Oo. ... ... . And I believe this is the same truck that Mr. DonM leaked -I mean spoke about:-laf ... I believe we will see a new high HP number after this event. Good Luck goes out to the gentleman bringing this BEAST. (and you know who you are... ) I think the Air will cooperate with you guys too so alot of great numbers should be laid down. Keep us informed guys!!