Who wants 0-60psi Carbon fiber gauges?

[SLittle]

I'll buy one if they have a carbon fiber fuel pressure gauge suitable for our trucks.

Scott

------------------
2001 HO 6spd 4x4 Dually - Jacobs E-Brake w/shifter switch, WAAG nerf bars with dually kickouts and Dodge/Cummins rear mud flaps.

 

[KatDiesel]

<font color=blue>You can get a 0 to 50 PSI gauge with a Carbon Fiber face and avoid the $150 screen charge. A while back I had them make 0 to 50 PSI UltraLites and they can put any backing on that you want, just cost and extra $25 for a "custom gauge". That is unless of course you "want" the 0 to 60 psi face, then go your route #ad


Call Ted at JRE (JannettyRacing) and I believe he can order them for you, he paid the $150 charge screening on the initial order because he wanted a gauge for himself as well.

Here is what it looks like in the UltraLite form :
<center> #ad
</center>
<font size =-2>


[This message has been edited by KatDiesel (Eric Howard) (edited 05-08-2001). ]

 

[DMC]

Check out www.dieselpage.com.
Isspro R8603 0-50 Psi boost 2" gauge with plumbing $38. 86. Isspro never let me down monitering $15000. 00 and up engines in class 8 trucks for over 10 YEARS.

Just another option



------------------
D McGrady 1996 Club Cab 6BTA 5. 9 12 Valve All Stock Except K&N and Wrangler A/T 305/70/16 136 K and going strong.

 

[Sky]

Im sure Isspros work great, but IMO they dont look trick like Autometer.



------------------
2001 QuadCab,SWB,Auto, 4X4,4" Flowmaster Raceing Exhaust, DTT TC & VB, EZ Box, Bosch 275 Injectors, Mag-Hytech transmission pan/Dana 70, K&N, 33" BFG AT'S... ... .....

 

[Blkdawdg]

I might get one if they offer a carbon fiber pyrometer and fuel pressure gauge. Let me know.

 

[Bad340fish]

Put Hiperf360 down for one! I told him about the post and he will not be able to get to a comp for a few days. So i am posting for him
Clark

 

[EMDDIESEL]

Ok, i spoke to Autometer and they said they will make us a 0-60PSI 2. 1/16" gauge (to fit in the "A" pillar) if we can order at least 5. They already have a 0-35psi in this series and they just came out with a 0-60psi in the Ultra Lite series.

SO, if anybody wants one, respond here and i will let them know. The price will be $72. 42 each (possible less, if enough people join) Let me know guys

 

[X-10]

Count me in for one if we can get it done fairly soon.
Blackdemon, they make the pyro in a 0-1600 part #4765 (correct me if I'm wrong Badfish, don't you have these?). I don't know about the fuel pressure gauge.
EMDDIESEL, thanks alot for checking into this for me on the other thread. How does that work for ordering if we do get the 5 people? Do we all have to order through the same distributor?
Doug

 

[EMDDIESEL]

Let me clear some things up. This order is ONLY for a 0-60PSI BOOST gauge in CARBON FIBER.
They already make a 0-60psi boost gauge in the ULTRA LITE series, that is P/N 4305 and is not a special order, it is available all the time. They also make a 0-60 Sport Comp.

I called Autometer and asked for this deal because somebody wanted Carbon Fiber specically, Not Ultra Lite. the person already knows about the 0-60 in the Ultra Lite and Sport Comp series.
So like i said, if 5 people want them, they will do the deal. Just let me know. The deal will require ordering direct from AutoMeter.

 

[EMDDIESEL]

Let me clear some things up. This order is ONLY for a 0-60PSI BOOST gauge in CARBON FIBER.
They already make a 0-60psi boost gauge in the ULTRA LITE series, that is P/N 4305 and is not a special order, it is available all the time. They also make a 0-60 Sport Comp.

I called Autometer and asked for this deal because somebody wanted Carbon Fiber specically, Not Ultra Lite. the person already knows about the 0-60 in the Ultra Lite and Sport Comp series.
So like i said, if 5 people want them, they will do the deal. Just let me know. The deal will require ordering direct from AutoMeter.

 

[EMDDIESEL]

I dont know why that posted twice?

 

[KatDiesel]

I realize you want the "Carbon Fiber" type background. What I am trying to say is there is already a 0 to 50psi template made (yes in the UltraLite Series), but you can have that used to make a 0 to 50 psi Carbon Fiber series and you will not have to pay the $150 screen charge because it already exhists! I'll get ya the part number when I get home.

If you have to have the 0 to 60 psi then by all means order them up, just trying to help ya out. Also be prepared to wait 8 to 10 weeks for your order #ad
I been through this before... ...

 

[EMDDIESEL]

I asked him if he could use another silk screen like from the Ultra Lite series but he said you cant because the silk screen includes the "Ultra Lite" logo. It would be nice to be able to "Recycle" another silk screen though. Thanks for the idea, i am going to see if maybe he can try and use it somehow

 

[KatDiesel]

First off, you can delete your post above, just click the edit button, then Check the delete post box, and submit.

Secondly, yes it will prolly have the same font as UltraLites, but it was just an idea. I can't remember who, but someone order a Carbon Fiber type gauge like that back when we worked it up. Maybe call Ted at JRE and ask how many of those types he sold and if it was done or not.

 

[K_Arts]

Any luck on the 60lb boost gauge?

Kev