Here I am

Who's Twins?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Diesel Power

06' juice w/ attitude group buy

  • Diesel Power
  • Replies: 0
M

Help looking at used 03

  • mschwier
  • Replies: 5
Status
Not open for further replies.
Summit

Summit

Whats the best set-up for the money? seriously looking at BD's twins kit. PIERS is probly awesome but theyre 1k more than BD as is ATS. hate to use arctic's setup as my stock charger has 86k hard miles on it and see's 40lbs boost daily. if someone has a smokin deal feel free to p. m. me cuase i'm ready to spend some denero.
 
I think Olee Poole makes some of the nicest kits, he does them in diffrent configurations but the ultimate would be his B1/B2 kit. Piers, BD, ATS, JR Adkins have all been used by people here, Im sure they will chime in.



www.powerbypoole.com
 
Who's twins

I have the ATS setup. Like most things, ... . you get what you pay for. I've heard that Idaho CTD (Nathan) makes a real nice set too.
 
I agree that the Poole twins look great. However, I've been trying to get more information and availability on them for over a month now without much success. Olee's customer service is severely lacking and so bad to the point that I've given up on him. I'm not going to beg anyone to take my money.



At this point I'm strongly considering the ATS twins. It's obvious that they have spent the most in engineering. The cast elbow they use looks incredible, and it positions the lower turbo exactly where it should be. This is important to me as I don't want to have any clearance issues when I go to install my shock towers. I also like the fact it'll bolt right up to my silverline exhaust without needing to hack into it.
 
Last edited:
I'd talk to IdahoCTD, he builds a great kit and they are very reasonably priced. Plus he's based out of Idaho. He has a 3rd gen that runs 12. 6's with stock injectors and stock CP3. I'd PM him as well, Olee also builds a great kit, I believe they work together on some stuff.
 
Who's twins

CLindsey said:
I agree that the Poole twins look great. However, I've been trying to get more information and availability on them for over a month now without much success. Olee's customer service is severely lacking and so bad to the point that I've given up on him. I'm not going to beg anyone to take my money.



At this point I'm strongly considering the ATS twins. It's obvious that they have spent the most in engineering. The cast elbow they use looks incredible, and it positions the lower turbo exactly where it should be. This is important to me as I don't want to have any clearance issues when I go to install my shock towers. I also like the fact it'll bolt right up to my silverline exhaust without needing to hack into it.
Click to expand...



I couldn't have said it better. I waited 7 going on 8 months after ordering my twins and heard more excuses if anything at all during that entire period from Olee. I ordered mine from ATS on a Wed at 2PM and they were at my installers on Fri at 10PM. I'd like to see anyone match that for service. Completely satisfied.
 
I ordered my B1/B2 set-up from Poole back at the end of Feb. I should have them next week if the coating gets done this week. I went the ceramic coated route so it's taking a little longer because of the coater he uses. I agree about time. But Olee's been great with me. Especially as much as I call him. He's sent me pictures every step of the way. Including my exact set prior to coating. Guess it's the money talks routine. They're already paid for, wondering if that's speeding things up.
 
I also run the ATS twins and am very satisfied with them. We recently pulled 12k through the hills of Arkansas with the Crazy Larry/ TS MP8 cranked and had zero EGT issues. This was anywhere from 75-90 mph. Low end is good with this setup, but it really comes alive on the big end.
 
CLindsey said:
I agree that the Poole twins look great. However, I've been trying to get more information and availability on them for over a month now without much success. Olee's customer service is severely lacking and so bad to the point that I've given up on him. I'm not going to beg anyone to take my money.



At this point I'm strongly considering the ATS twins. It's obvious that they have spent the most in engineering. The cast elbow they use looks incredible, and it positions the lower turbo exactly where it should be. This is important to me as I don't want to have any clearance issues when I go to install my shock towers. I also like the fact it'll bolt right up to my silverline exhaust without needing to hack into it.
Click to expand...



Hey Clint i send you an e-mail. . I also have a phone you can call i just don't check e-mails all day :eek: :eek:
 
OT-OF-HERE!! said:
I couldn't have said it better. I waited 7 going on 8 months after ordering my twins and heard more excuses if anything at all during that entire period from Olee. I ordered mine from ATS on a Wed at 2PM and they were at my installers on Fri at 10PM. I'd like to see anyone match that for service. Completely satisfied.
Click to expand...



I want to use my stock turbo. . NO i want a Dodgezilla?? I want them. . NO i don't want them my truck broke?? DID I take any of your money NO! Oo. Oo.
 
OPoole said:
Hey Clint i send you an e-mail. . I also have a phone you can call i just don't check e-mails all day :eek: :eek:
Click to expand...

Me thinks it would be a smart move to hire someone to take calls and answer emails, service write- so to speak. And I don't mean to BURN you-seriously, just gota take the money when its there.

The clutch you held was the only thing you ever had for me on-time. Price wasn't a factor-made a trip to your place and you wernt there so I used another friend of mine. If you get a VW tuner lined up-EDIT: Before christmas-buzz me.
 
Last edited:
Please!!!

OPoole said:
I want to use my stock turbo. . NO i want a Dodgezilla?? I want them. . NO i don't want them my truck broke?? DID I take any of your money NO! Oo. Oo.
Click to expand...



There are several others who got the same dance from you as I did. Yes I changed but that was back in Sept and I was next on the list and you hadn't done anything on mine yet anyway so what cost to you,... so then I went with the Dodgezilla and you had that in a few weeks and from Oct to Jan I waited for your POS powdercoater to do cold pipes,... give me a break. I have had things powdercoated in two days and said I'd take it not powdercoated and you know d... n good and well you didn't have them done to ship and we waited a few more months,. . Geez. Didn't take any money but brother time is money and you got plenty. Need me to post names of others who have waited more than six months????? :eek:
 
I didnt start this thread to start a war or ******* match about he said , she said.



i wanted to hear from those WITH!!! twins that HAVE some input as to whose twins they run and how they perform.



nuff said (asked), AL
 
I just installed a set of Nathan Wrights twin kits a month ago and the set was the best set we have installed from anyone hands down give him a call
 
Status
Not open for further replies.
Issue 128 – Digital Version
Digital Magazines
FREE!
TDR Test Drive - Digital Edition
Renew
Subscribe
Gift Subscriptions
Back Issues
Subscription Status
Address Change Form
Buyer's Guides
Ram Diagnostic Trouble Codes
The Perfect Collection
The Perfect Collection Vol. II
TSB Updates
Dodge/Cummins Historical Overview
Cameron Collection
What Makes Us Tick?
Product Showcase
Advertising



Turbo Diesel Register
Issue 128 – Digital Version
Digital Magazines
FREE!
TDR Test Drive - Digital Edition
Renew
Subscribe
Gift Subscriptions
Back Issues
Subscription Status
Address Change Form
Buyer's Guides
Ram Diagnostic Trouble Codes
The Perfect Collection
The Perfect Collection Vol. II
TSB Updates
Dodge/Cummins Historical Overview
Cameron Collection
What Makes Us Tick?
Product Showcase
Advertising



Back
Top