Here I am

Engine/Transmission (1998.5 - 2002) Why is this...

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission Overhead Fuel Computer?

2nd Gen Non-Engine/Transmission Borgeson Steering shafts

Status
Not open for further replies.
Seems the last 2 times I changed my fuel filter I lose a lb or 2 of fuel pressure. Am I getting air in the line somewhere thats causing this or what. Truck seems to run the same so there is no change there.
 
PSI drop

I found the same thing happened to me when I changed the fuel filter with less then a full tank of fuel.

I think that changing the fuel filter with a low fuel load is hard on the lift pump when priming the new filter.

Now I fill the tank and change the fuel filter with no more drop in psi.

P. S. I have a gage before and after the filter.



Good Luck

Cliff
 
I see in another post SNOKING recommended cleaning cleaning pump relay and applying die electric grease. Will try that.
 
Last edited:
Status
Not open for further replies.
Back
Top