Window motor rebuild

[IRoss]

Does anyone have a part number for the window motor brushes or any experience with said motor? My driver side motor is a little touchy ( I have to wiggle the wire to the motor, or pull the window up a little to get the motor to kick in) and I figured that if I was going to go to all the work to pull the motor out I would give it a good once-over... My local Dodge dealership tells me I'm pretty much out of luck unless I want to pay premium for a new motor...

 

[dpuckett]

I'd start with an automotive electrical shop. They may not have what you need, but may be able to point you in the right direction.



Daniel

 

[CBottomley]

I just changed my driver side window motor not long ago. I got mine at O'reily's auto parts. Also NAPA has them too. Paid about $100 for a rebuilt one. I first had trouble finding the correct one. They make two different ones. My truck is a early 1991. I had the parts man go to a 1990 parts listing to find the right motor. This explains why to I used two different parts houses. I also replaced all the window seals to since they have to be removed any ways. Hope this helps. Chow







Early 1991 Dodge 250 Cummins. 3 speed torqueflite with a Gear Vendor. EGT, Boost, transmission Temp (Sensor installed in hot line from transmision), tachometer. power steering cooler with inline filter/magnet. Coolant filter. two underbed transmission coolers with electric fans. Each wired separately. Huges performance heavy duty tow master torque converter. K & N air filter.