2nd Gen Non-Engine/Transmission windshield wiper fluid

[ALehman]

All of a sudden the other day my windshied wiper fluid dosen't spray. Checked the fluid and it is up. How can i check if my pump is ok or it is bad?

 

[CumminsPower98]

First check and if you can hear the pump with the key on and the engine off. If you can't hear anything the next step would be to test the wire and see if you are getting power. If you are getting power to the pump then it's probably bad but another step beyond this would be to hook up some jumper wires direct to the battery to see if it runs just to be sure you don't have a ground problem or something. If you are getting no power to the pump then you will need to start checking other things out like the switch, wires, fuses and so on.

 

[DavidC]

Could also be clogged nozzles.



Dave

 

[Willys]

You might want to check to make sure all the lines are still plugged in. Sometimes its easy to accidently disconnect one while working on something.