2nd Gen Non-Engine/Transmission wiring

[SJohnson]

Where is the best place to install CB coax through the firewall on a 1995 dually 4x4 with cummins engine.

 

[Whitmore]

There are a couple of rubber graumets going thru the firewall that will have enough room for coax

 

[Steve St.Laurent]

I'm moving this over to the 2nd gen forum for better exposure. Also, as said above there is a gromet that you can easily pass the coax through, it's to the drivers side of the clutch (or brake) pedals. Look up and you'll see it.

 

[EMDDIESEL]

I used the grommet Steve mentioned to get my fuel line for the gauge into the cab. It is a large grommett so it will be fine for a CB antenna wire.