Won't start after injector install

[Diese1nut]

Just swapped the injectors. I have done it before, but this time the truck won't fire.

I bled fuel from fitting at injector pump, and it seems ok.

What next. I have cranked and cranked.

 

[Doc Tinker]

Loosen all the injector lines at the head and crank until you get fuel from all of them. Tighten them down and you should be good to go.





Doc

 

[Bob Wagner]

we usually only have to crack 2 or 3 to get the job done and let the lift pump do the work, turn the key and bump the starter to trigger the lift pump



AND Don't crank for more than 10 seconds at a time

 

[Diese1nut]

Happy

All better.

Thanks guys.

Love this site.

 

[dmurdock]

I'm sure merrick could give you some tips