Figure this out...
I checked the oil right before I drained it... was about a quart low...
I had about 0. 5 quart left from a previous change that I used to fill the new filter along with a little from the 3 other gallons I had for the change...
I installed the filter and the remaining oil (basically 12. 5 quarts)... it was at half a quart low after leaving it idle and pump up for a few minutes (I also left it sit a while before checking it)...
This in itself didn't bother me. But then I placed the contents of the drain pan back into the three gallon bottles... I had a little more than 2. 5 gallons of used oil.
So where is the 2. 5 quart difference??? There's 2. 5 quarts more in the pan now than I drained out... just curious as to what everyone thinks??
steved
I checked the oil right before I drained it... was about a quart low...
I had about 0. 5 quart left from a previous change that I used to fill the new filter along with a little from the 3 other gallons I had for the change...
I installed the filter and the remaining oil (basically 12. 5 quarts)... it was at half a quart low after leaving it idle and pump up for a few minutes (I also left it sit a while before checking it)...
This in itself didn't bother me. But then I placed the contents of the drain pan back into the three gallon bottles... I had a little more than 2. 5 gallons of used oil.
So where is the 2. 5 quart difference??? There's 2. 5 quarts more in the pan now than I drained out... just curious as to what everyone thinks??
steved