Competition s300 to ht3b hotpipe

[CWolgamott]

Hey guys i got a Ht3b and a BD super B(s300) and want to put them together and was wondering where i could find the hot pipe or the flanges to make my own, it appears this isnt a very common setup but i think i will work very nicely thank ahead of time.

 

[Moose Truck]

Rip's Sourceautomotive

Hey guys i got a Ht3b and a BD super B(s300) and want to put them together and was wondering where i could find the hot pipe or the flanges to make my own, it appears this isnt a very common setup but i think i will work very nicely thank ahead of time.

Try Rips, he has a little stuff ;

Twin Turbo Parts



There are others I'm sure, Moose

 

[CWolgamott]

been talking to him but he dosent seem to have the s300 to ht3b peices i need. also any one have specs or a mount for a ht3b? i need one dont think the s300 can hold up to the ht3b's wight alone

 

[RyanB]

Hey guys i got a Ht3b and a BD super B(s300) and want to put them together and was wondering where i could find the hot pipe or the flanges to make my own, it appears this isnt a very common setup but i think i will work very nicely thank ahead of time.

I just built my own set of twins this summer and I had my brother cut the flanges as well as a really nice transition from the 4" schedual 40 pipe to the flange on the big charger. We are actually thinking of making some to see if there would be a market for them. A few guys on here made some comments on it in this post... https://www.turbodieselregister.com...s-only/187210-busy-weekend-twins-finally.html



As far as the hot pipe its self if you want to make your own I found outs its pretty common once I knew what I was looking for. Go to any large plumbing shop and ask for 4" Weld On 90 degree black pipe. They are cast steel and work great!!!!



Good luck with the setup and send me a PM if you have any more questions.



RyanB

 

[thekidfan]

I run a 300 and a 3b. 5 as far as I know no-one makes these as a kit! Try talking to Brad Ponci @ Ponci's Diesel Center you can P. M. him on here and I'm sure he could get you the pieces you need.