Competition Gale Banks Engineering DMax Type D debuts 8.64 SMOKE FREE!!!!

[ThrottleJockey]

Jeez Gale, calm down before you have a heart attack or something. I had a pretty horrible modification experience with Bank's products AND customer service and the gentlemen here on the TDR saved my truck and my faith in diesel BOMBing. As you know, this is a Cummins forum, and no one asked Mr. Treydte to post his Chevrolet based results on this board. If your'e gonna offer it up on this board, we reserve the right to tear it down if we want. That's part of what makes this board so great. That being said your D-Max is quite impressive, NOS or not.



Iv'e said before and I'll say it again,



Old Ironsides awaits the smokeless 6. 7L Bankspower Cummins Type P.

 

[Regcabguy]

Banks experience.

My only Banks experience was a positive one. I arrived in Azusa for installation of a Stinger plus system. Their facility was loaded with Powerstrokes primarily and lonesome me w/my recently purchased '99. The techs literally pleaded to work on the Cummins for the relative simplicity of an inline six. They promptly went to work and had the truck for about an hour before informing me that I had a "weak lift pump" which they claimed Cummins and Dodge knew about but weren't providing a permanent fix. They politely declined to install their system and sent me on my way with instructions to provide their written documentation to Dodge. They warned me that Dodge would refuse to admit something was not Kosher with the fuel system. After taking two days to secure the testing equipment,the dealer called me up and said nothing was wrong. This was nearly verbatim to what Banks said they would state. Anyway,a new engine(53) and lift pump@ 17,500 miles later,I decided to go with DD injectors and an Edge EZ for my power upgrade. Banks was very good to me that day and predicted Cummin's/Dodge's fuel system shortcoming to the letter.

 

[ThrottleJockey]

Anyway,a new engine(53) and lift pump@ 17,500 miles later,I decided to go with DD injectors and an Edge EZ for my power upgrade. Banks was very good to me that day and predicted Cummin's/Dodge's fuel system shortcoming to the letter.

Soooooo..... you decided to repay them for your positive experience by spending your money elsewhere?



I can hear Gale now: "Thanks for nuthin'... "#@$%!

 

[Regcabguy]

Thanks to Banks.

QUOTE=ThrottleJockey;1840566]So..... you decided to repay them for your positive experience by spending your money elsewhere?



I can hear Gale now: "Thanks for nothing'... "#@$%! [/QUOTE]



Yeah,with a subscription to this site I learned there were alternative ways to easily make power gains with the 24 valves at a substantially lower price. Thanks Gale anyway for the honest appraisal of the lift pump problem.

 

[TCDiesel]

The One thing that escapes Peoples Notice, Is Gale Banks Cares were this industry is headed, has been doing it for decades. I don't see how deep your resources are and how big your capitals gains is , it will not Purchase the integrity that Gale Banks has and the loyalty to this industry.

Nothing wrong with Constructive Criticism, in fact we (T&C) encourage it. This is the platform all will benefit. .

Now let's Make My Cummins that fast.

 

[BigBadDodge]

The One thing that escapes Peoples Notice, Is Cale Banks Cares were this industry is headed, has been doing it for decades. I don't see how deep your resources are and how big your capitals gains is , it will not Purchase the integrity that Cale Banks has and the loyalty to this industry.

Nothing wrong with Constructive Criticism, in fact we (T&C) encourage it. This is the platform all will benefit. .

Now let's Make My Cummins that fast.

He is going to be made you for spelling his name wrong :-laf



it's GALE



BBD

 

[TCDiesel]

I'll Be calling it CBE before You know it. . Thanks For the correction

 

[ThrottleJockey]

He is going to be made you for spelling his name wrong :-laf



it's GALE



BBD

Look who's talking Scott; it's MAD AT, not made :-laf



j/k

 

[BigBadDodge]

Look who's talking Scott; it's MAD AT, not made :-laf



j/k

LOL, I am the last person who should be correcting folks, good thing these forums aren't graded :-laf

 

[Yo Hoot]

So how far removed from the original Dmax is the motor? Are there any factory parts on it? Heads? Engine block? Crank?

In the end it's what fit's and weight.

Than just add $$

 

[Bobcat698]

So Greg never worked for Banks?

 

[RacinDuallie]

So Greg never worked for Banks?

Weird huh? He done told me he was a very well paid employee- contract and all... ... I really hate being lied to... ... #@$%! Very low class to constantly lie and several months later get caught lying... .

Wonder what other untruths will surface

 

[Timbeaux38]

Greg never yold me he was an employee. He told me he was the Driver.

 

[Highfinance97]

Weird huh? He done told me he was a very well paid employee- contract and all... ... I really hate being lied to... ... #@$%! Very low class to constantly lie and several months later get caught lying... .



Wonder what other untruths will surface

Secrets dont make friends Jeff, LET IT ALL OUT!!!!:-laf







Michael

 

[RacinDuallie]

Secrets dont make friends Jeff, LET IT ALL OUT!!!!:-laf
Michael

Na... ... ... I said enuf, besides I don't wanna lower myself to that level... :-laf



I just wish people would be straight up with folks... ...

 

[RobertP]

the truth will set you free. :-laf

 

[RacinDuallie]

I don't need to be set free. :-laf:-laf:-laf:-laf:-laf

 

[GIT-R-DONE]

Weird huh? He done told me he was a very well paid employee- contract and all... ... I really hate being lied to... ... #@$%! Very low class to constantly lie and several months later get caught lying... .



Wonder what other untruths will surface

And YOU expected different ?