304 Stainless intake plenum ??

[Stefan Kondolay]

I undo the nut on the side of the block so there is more movement then I put the bracket on the front side. You could probably put it on the rear because that's were I put it on the 2nd gens.

 

[Stefan Kondolay]

Sorry Bob didn't see you rpost, I'll e-mail them tomorrow. I could believe the test truck picked up an addition 20hp and 35ft. lbs with the heater grid delete. I have build the square to round for the guys running the tube style plenums and square to square for the guys running factory or cast plenums.



Next will be ladder bars, that are a reasonable price and functional.

 

[MMeier]

Just got my invoice today, hopefully tomorrow?

 

[DBrickel]

Next will be ladder bars, that are a reasonable price and functional



I'm drooling already. Oo. Whats the time line?

 

[Stefan Kondolay]

Bill and I will start working on them next week. From there it shouldn't take very long.

 

[Gary - K7GLD]

Bill and I will start working on them next week. From there it shouldn't take very long.

HEY Stefan, you have Email, and a phone call to return! :-laf:-laf

 

[Gary - K7GLD]

Got one of the intakes W/grid delete coming for my '02 - might be able to get a baseline dyno run in next weekend, but the intake won't get here in time, so will have to do a followup later, after installation...



But WILL get the intake on before a 1500 mile RV tow end of May - over familiar route, so should get a good idea of any observable power increase or reduced EGT... Oo.

 

[Tomeygun]

Next will be ladder bars, that are a reasonable price and functional.

ohh yeah, that what I'm talking about...

 

[DBrickel]

Bill and I will start working on them next week. From there it shouldn't take very long.

Do you have a price structure on them yet?



How long till the stainless plenums are ready for the 12 valves? I have $$ burning up here

 

[Stefan Kondolay]

We are working on the 12 valve plenums right now. I am building a new base and grid delete so that we can really free up the flow on the 12 valves.



I am hoping to have the traction bars for between $350-$450 range.

 

[JAlford]

Stephan,

SS Traction bars for a '99 dually - longer the better. What is currently on the market is too short, gives a bit of harsh ride and limits axle movement some, and hard to find in stainless.

Let us know when they are ready!

Jeff

 

[DBrickel]

We are working on the 12 valve plenums right now. I am building a new base and grid delete so that we can really free up the flow on the 12 valves.



I am hoping to have the traction bars for between $350-$450 range.

Post pics as soon as you can Wanna see.



Definitely in for the plennum with grid delete

 

[wlowe]

Stefan,

Will the traction bars be made of stainless steel? If so, I would definitely be interested.

 

[Mad Bomber]

Looking at the pic's it looks as it would be good for keeping air moving. The stock one makes the air stop and change directions. (fluid dynamics) Now HOW MUCH?

 

[Stefan Kondolay]

The Intake horn will be $249 for the introductory batch, and the square to round transition delete is $65. 00.

 

[MFranz]

WLowe,

I sent you a PM hoping to get information on a Parts catalogue for the 2001.

Also I just bought a ProWeld trans cooler and was wondering what your experience has been with that product. Sorry to Hi Jack this thread but I wasn't sure the PM was going thru.

Thank You

Mike

 

[wlowe]

WLowe,

I sent you a PM hoping to get information on a Parts catalogue for the 2001.

Also I just bought a ProWeld trans cooler and was wondering what your experience has been with that product. Sorry to Hi Jack this thread but I wasn't sure the PM was going thru.

Thank You

Mike

Mike, PM sent.

 

[Bob4x4]

When you get all your current ordered units sent out,I"ll flow test one.

I need to talk to you about some upgrades too.



Bob

 

[HookMeUp]

Just got my intake horn. This is a thing of beauty! I soon as I get it installed I'll post some pic's.

 

[willyslover]

Stefan. . did you ship me a grid delete [haven't seen the box yet] . . if not please send me one so I can install soon ... I'll want the one for temporary delete as I'm a snow country guy