304 Stainless intake plenum ??

[Yo Hoot]

Hoot, how'd you get the dipstick under the airhorn?? I had tp put mine over the top which detracts from its appearance, I was afraid it was going to break if I tried bending it anymore then I did.

I just bent it.

 

[Yo Hoot]

Here's a pic. .



#ad

 

[TravisG]

Do you have to delete the grid heater?



Hoot- Will you put the grid heater back on during the winter or do you not drive your truck then? Just askin cuz it gets coooooolllllllllddddddd in Green Bay during the winter.

 

[Yo Hoot]

Do you have to delete the grid heater?



Hoot- Will you put the grid heater back on during the winter or do you not drive your truck then? Just askin cuz it gets coooooolllllllllddddddd in Green Bay during the winter.

My heater stays in. I don't think it's worth the trouble removing it.

 

[TravisG]

Oops. In that last picture you posted it looked like the heater was gone.

 

[Yo Hoot]

Bottom flange on this pretty pipe is starting to rust up.

 

[FFL8N]

I am also interested... . any pics yet LOL... just kidding...

 

[DBrickel]

Very Cool With grid delete

Originally Posted by Stefan Kondolay

Sorry DBrickel,



As soon as my machinest gets back from holidays I'll have him build some 12Valve bases.



Stefan





I never did hear any more about mine. Guess I got lost in the shuffle

 

[GOTSOOT]

need to clean up the mid pipe welds,make it look like it is a one piece tube. !!

 

[Stefan Kondolay]

I didn't sand the welds on purpose, if you see one of these in person the welds are so beautiful that you wouldn't want the sanded. I personally feel that if the welds were sanded they would have the custom built look.



DBrickel,

Sorry I am have more 12 valve set-ups built, basically what they are is a 2nd gen 24valve with a different base plate that eliminates the heater gird. Unfortunately the base is about $40 though.

 

[DBrickel]

I didn't sand the welds on purpose, if you see one of these in person the welds are so beautiful that you wouldn't want the sanded. I personally feel that if the welds were sanded they would have the custom built look.



DBrickel,

Sorry I am have more 12 valve set-ups built, basically what they are is a 2nd gen 24valve with a different base plate that eliminates the heater gird. Unfortunately the base is about $40 though.

Thanks Stefan. Can you pm me with the total and let me know when you want payment?

 

[DCreed]

I have a DTT 12v horn and plate only used for mock-up. PM if interested. can ship immediately. pics avail.

 

[rivercat]

nice how it started as a less than 250 and now its 289. Any one find it cheaper?

 

[MA2LA]

nice how it started as a less than 250 and now its 289. Any one find it cheaper?

I bought one off ebay that is powder coated for about 150 with 3 ports in it. needed a little cleaning up inside but no biggie, deffinalty gained in mid range grunt, I had to back off the POD so the trans didn't slip.

 

[rivercat]

nice, yeah they have one that is polished aluminum for only 160. thats the one I want but gona do some work to the intake plate first like Dcreed did.

 

[DODGEDADDIE]

Any one put on an aftermarket intake horn ,,while using GENO'S remote fuel filter adapter??

If so does eveything still clear,,etc???



Mike In Maine