Seat heater Kit by Rostra

[JCrockett]

So the switches went in the stock location? Would you give me the Mopar Part number again? When you get a chance,would you take a couple pictures of the switchs? I'm looking to add some lights and I'm going to need to mount extra switches. I dislike regular toggles and we don't have many flat surfaces to mount switches. It would be ideal to be able to mount another bank of switches AND make it work

Retired

I just loaded up a pic of my switch install on my 05, take a look (in my photo gallery) and if you like it, I have a local source for the switches you can use for the heaters and your lights. If you dont have the Electronic 4WD switch we have made other panels that will hold up to 7 of these swtiches if needed.

You can come take a look in person if you like too, I live in Wasilla.

Thanks

 

[retirednak]

Damn... that's just the ticket! Where did you mount your seat heater switch? Is your source out here in the Valley? If so,who do I go see?

Thanks-Casey

 

[WMonroe]

Heres a few pictures.







Both heaters are off.

#ad




Both heaters on high.

#ad




Drivers side on low and passenger side on medium.

#ad

 

[retirednak]

Nice switches,wish my heaters had that many choices. I'm either too hot or not enough. Your switches won't mount in the stock location.

 

[WMonroe]

if you bought the panel you could mount them in the stock location. I didn't because i use that spot and didn't want to get rid of it.

 

[retirednak]

Retired

I just loaded up a pic of my switch install on my 05, take a look (in my photo gallery) and if you like it, I have a local source for the switches you can use for the heaters and your lights. If you dont have the Electronic 4WD switch we have made other panels that will hold up to 7 of these swtiches if needed.

You can come take a look in person if you like too, I live in Wasilla.

Thanks

I'm going to go with the style JCrockett has on his truck. The switchs are marked for different lights also.

Thanks for your input. -Casey

 

[retirednak]

Retired

I just loaded up a pic of my switch install on my 05, take a look (in my photo gallery) and if you like it, I have a local source for the switches you can use for the heaters and your lights. If you dont have the Electronic 4WD switch we have made other panels that will hold up to 7 of these swtiches if needed.

You can come take a look in person if you like too, I live in Wasilla.

Thanks

This is way off the subject,Sorry.

Are you aware of a Dyno out here in the Valley or Anchorage? Somebody has one,saw it at Polar raceway in Palmer. PM sent

 

[JCrockett]

Retired, sent you a PM



WMonroe

Those switches look great, unfortunatly you have a different dash in your 07 than Retired and I have in our 03 and 05. They changed the dash style in 06 to the unit you have.

thanks

 

[WMonroe]

guess I should have looked at your sig before replying. :-laf oh well.

 

[retirednak]

#ad

 

[jdross440]

Has anyone tried the heaters from heatyourseat.com? They have 2 and 3 heat versions.