Installed the Engine Block Heater Extension Cord in my 2014 Dodge Diesel 2500 4x4 today. I am deeply grateful to all of you responded to my original request for assistance and for the pictures that were sent too. After removing the top of the Air Cleaner Box and the "S" shaped Air Intake Breather Tube, the Block Heater Connection was visible near the oil filter and accessible.
There were two prongs visible, I slid the rubber female connection onto the prongs then tightened down the retaining nut. I assumed it did not matter which way the connection was made, because there were no distinguishing marks. (positive or negative)
Before running the cord through the frame to the front bumper area, I plugged the Block Heater to household current and I could feel the connection on the engine block heating up. So I assume it's working just fine.
Again a Huge Thanks to all of you who responded.
Cheers......
Reno Dave
There were two prongs visible, I slid the rubber female connection onto the prongs then tightened down the retaining nut. I assumed it did not matter which way the connection was made, because there were no distinguishing marks. (positive or negative)
Before running the cord through the frame to the front bumper area, I plugged the Block Heater to household current and I could feel the connection on the engine block heating up. So I assume it's working just fine.
Again a Huge Thanks to all of you who responded.
Cheers......
Reno Dave