gsbrockman
TDR MEMBER
One of the four LED's on my turn signal on the driver's side tow mirror went out recently on my '14 RAM 3500 Crew Cab DRW.
I swapped my black tow mirrors with another member from another forum to chrome tow mirrors last summer.
The part number for a left side LED "Lamp, Turn Signal" for a chrome tow mirror is 68087235AA.....List was $94.58 and I paid $61.61 plus tax.
:--) (The black tow mirrors have a black stripe around the lamp, and the chrome tow mirrors have a silver stripe around the lamp).
Anyway.....I thought I'd share with the TDR membership just how easy this process really is.
You'll need a Torx T-15 screwdriver, a new replacement lamp, and about 10 minutes.
Begin by adjusting the power portion of the mirror towards the convex mirror. This will give you a little better ability to squeeze your fingers in to pull out the convex mirror.
#ad
Grab the convex mirror and pull downward gently. It will take a little force, so don't be too scared to tug on it.
#ad
This is what the back of the convex mirror looks like for reference purposes (so you get an idea as to what type of tabs it has fastening it to the housing).
#ad
Disconnect the wiring harness from the LED turn signal. Using the T-15 screwdriver, remove the single attaching screw. Remove the LED turn signal.
#ad
I folded my tow mirror towards the front for a little easier access.
#ad
A close-up shot of the housing with LED turn signal removed.
#ad
Pop out the defective light, pop in the new light, tighten the T-15 screw snugly, then re-connect the wiring harness. Verify the new one works correctly before going any further.
#ad
Close-up shot of the T-15 screw and wiring harness.
#ad
Pop back in the convex mirror, then re-adjust the convex & power mirrors to their previous settings. You're done!!!!
#ad
I swapped my black tow mirrors with another member from another forum to chrome tow mirrors last summer.
The part number for a left side LED "Lamp, Turn Signal" for a chrome tow mirror is 68087235AA.....List was $94.58 and I paid $61.61 plus tax.

Anyway.....I thought I'd share with the TDR membership just how easy this process really is.
You'll need a Torx T-15 screwdriver, a new replacement lamp, and about 10 minutes.

Begin by adjusting the power portion of the mirror towards the convex mirror. This will give you a little better ability to squeeze your fingers in to pull out the convex mirror.

Grab the convex mirror and pull downward gently. It will take a little force, so don't be too scared to tug on it.

This is what the back of the convex mirror looks like for reference purposes (so you get an idea as to what type of tabs it has fastening it to the housing).

Disconnect the wiring harness from the LED turn signal. Using the T-15 screwdriver, remove the single attaching screw. Remove the LED turn signal.

I folded my tow mirror towards the front for a little easier access.

A close-up shot of the housing with LED turn signal removed.

Pop out the defective light, pop in the new light, tighten the T-15 screw snugly, then re-connect the wiring harness. Verify the new one works correctly before going any further.

Close-up shot of the T-15 screw and wiring harness.

Pop back in the convex mirror, then re-adjust the convex & power mirrors to their previous settings. You're done!!!!


Last edited: