Cummins2014
TDR MEMBER
Yep an innocent TROLL
Mod PLEASE note who couldn't leave me alone!!!
Take some advice from others ,and tone it down , and see how that works . Name calling won’t help .
Yep an innocent TROLL
Mod PLEASE note who couldn't leave me alone!!!
You missed my point.Yes they did, and generally lower power and lower constant load.
Also, back on those days diesels didn’t have favorable cold weather reviews so people didn’t run them as much as they do now. The town I worked in Alaska in had hardly any diesels 20 years ago. When I asked why it was their winter reputation, heck the gas motors had block heaters, battery heaters, and often trans heaters. When the temps got too low parents wouldn’t let their kids ride on the diesel busses due to their reliability.
Lots of benefits to the changing technology of the last 30 years in diesel pickups. Oil is just one of many improvements. Cummins ISB’s have always had better than average winter behaviors thou.
Alaska winters a 5w40, 0w40, remember most so called synthetics are just conventional oils being called synthetic due to americas court system. Personally I live where it gets -35*F and have seen colder, I've never really felt I needed a boutique synthetic. Actually I was turned off boutique synthetics from their claims that I personally never seen.So with all these opinions which oil better to use in Alaska? Conventional or synthetic?
For what it’s worth, I lived in North Pole Alaska for 11 years. Had me a ‘95 12v Cummins. I ran 15w40 Rotella T year-round, no issues. Why? It was either in a heated garage or plugged in to a head bolt outlet prior to use in the winter.
You missed my point.
On inferior oil as compared to today's oil so imagine that, less engine technology, less lubrication technology, less computer control keeping engines in more of a over fuel state not as precise timing control, yet those engines still had a good if not better track record based on conditions.
I get what your saying, which is why I responded the way I did. Simpler engines generally last longer and are more reliable. Oil has never really been an issue is these motors.
The complexity of the engines has increased their use thou, as people prefer turn-key. That was my point, they are far wider reaching and in more extreme environments than 30 years ago.
As far as boutique oils that’s all preference too. I only run standard oils a few times in my 05 and my oil pressure and temperature gauges showed a difference that I didn’t like on dino. I also didn’t like the results of my freezer test, but it still likely would have been fine... just preference.
I am used to watching the gauges running just the conventional dino 15-40. I will be interested to see if there is any difference in oil pressure ,and temperature running this synthetic.
On your 2014 I doubt it, as the gauges aren't real.
On my 05 I had aftermarket pressure and temp gauges.
So you wouldn't think I would see any difference ?? I'm not interested enough to care, but thought maybe I would see something. As long as there is some oil pressure there I'm happy .![]()
Since the ECM doesn’t actually know the temp or pressure the gauges won’t read any different. All there is on the block is a pressure switch, so the ECM is the same.. as long as there is pressure it’s happy.
Constructive criticism is a useful thing. Accept it when it is offered. People don't pick on you because they don't like your screen name or some other arbitrary thing. There is a reason.