Here I am

Fuel Filter / Filters on the 2021

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Best Way to Balance 19.5 Tires

Broken 4TH Gen Cummins Filler Neck

Status
Not open for further replies.
I just bought my 2021 in July and it is now due for the first fuel filter change. I have heard that there is more than one fuel filter on this truck. I know where the obvious one is on the driver side of the engine. Is there another fuel filter that I need to locate and replace?
 
Yikes, Who thought a fuel filter would be back ordered? I guess I better get the Owners Manual out. When is the first change recommended? I bought my '21 in September.
 
Yikes, Who thought a fuel filter would be back ordered? I guess I better get the Owners Manual out. When is the first change recommended? I bought my '21 in September.

Filter of all kinds are difficult to obtain right now. I've heard it has something to do with the high production rate of masks and a lack of media for other filters.

The change interval is 15K miles.
 
Filter of all kinds are difficult to obtain right now. I've heard it has something to do with the high production rate of masks and a lack of media for other filters.

The change interval is 15K miles.

Thanks I guess I should get some in stock and see how to change them... Only have 1,500 miles on the truck so I have some time.
 
comrade - no offense - but are they genuine mopar? just throwing that out there. have a buddy with several shops. he said theres a lot of fake filters and such on e bay and amazon. cheers sir!
Yes genuine Mopar filters in Mopar boxes. I just ordered another set this morning.

TDR won't let provide link to Amazon. $145 w/free shipping. More than I paid last time but are in stock

Amazon product ASIN B00MGSC2IW
 
Last edited:
Yes genuine Mopar filters in Mopar boxes. I just ordered another set this morning.

TDR won't let provide link to Amazon. $145 w/free shipping. More than I paid last time but are in stock

Amazon product ASIN B00MGSC2IW

That's not cheaper than Geno's. Your link is $156.46, Geno's is $139.95, plus shipping. Even at $145 on Amazon I would not call it way cheaper than Geno's.

The filters the OP needs are even cheaper at Geno's, $122.
 
Always has been cheaper in the past through Amazon.

Interesting, Geno's has always been cheaper when I've bought them. I ordered a set in December and Geno's was MUCH cheaper than Amazon, $105 plus shipping. They were backordered, but I was just ordering a set to replace the ones I am about to use for a filter swap.
 
Screen Shot 2022-01-13 at 7.58.19 AM.png
Here's my last order. Im betting that Geno's prices will go up also; everything else has
 
I dont care how much cheaper they are on Amazon.. I always have and will continue to buy them from Geno's and support Robert and Robin's small business. Their outstanding... dare I say remarkable customer service is worth the extra $$... In fact I am going to call them right now and order a new set of filters so I can get them on the shelf when they come in.. (I also need a block heater cord since a 90k$ truck does not come with one stock..)

Any benefit to getting the universal mt vs the standard cord? They dont make a bumper mount yet for the 19+ trucks.
 
@bcbender, How about getting this one and make mount to fit bumper?
https://www.genosgarage.com/product/wd-bhppl-dodge-cummins-diesel-block-heater-plug/winter
I'm sure you can bend a 1/8" piece of steel to correct angle to work. I bent some steel to make light bracket to mount led in bumper. Used one side of block heater mount and made bracket for other side of light.
And as far as fuel filters, Geno's gets my business unless it's a I need it now and can't wait! Usually have filters for change in advance on self. When I use last set, Order 2 sets to have on shelf. Helps support TDR also!
 
My 18 didn't come with the cord so I bought the OEM cord. It was a few more bucks but it did have the christmas tree's clipped on at the correct spots for securing the routed cable.
 
Status
Not open for further replies.
Back
Top