Recent Content by DickieGreen

Yes there was a new fca on pump taylor diesel works on cummins the guy that said replace pump has shop and works on all diesels

Thanks p-Bar

when i changed injectors i blew out injectors lines but not the rail not sure on scanner just know it was snap on he said he could check all that and injectors were bosh rebuilt by taylor diesel in memphis tn and im thinking about towing truck to them and let them run scan thats all they do is...

oh yea one code that keeps showing is p0148

Hello folks im still needing help just a little review bad fuel pulled tank flushed tank replaced in tank pump blew lines out from tank to underhood filter housing replaced filter no start injectors tested replaced all 6. crank about 6 to 8 sec would start after driving about 20 min if you let...

Thanks can a dealer scan and pin point the prob?

what would cause pressure to be to high

the one that comes off of pressure relife valve and cp3 pump i think its return line and 5.9

not yet 2007 and code was p0148 thanks

ok thanks gotta another problem now stripped out threads on filter housing do you think heli coil will work ok thanks again

Hello I put 6 new injectors in fri after getting bad fuel was harder to start than it use to put about 100 miles on it started to work this morning and she died at stop sign finally got fired back up and has died 4 more times is there anything I can check before getting it to dealer thanks for...

Thanks for advice I have tried capping off each injector still no start

I pulled injectors this am some grud on 3 of them tips looked ok just wondering if I should have them tested or bite the bullet and replace them all truck has 146,000 miles any help will help lol

i did try some starting fluid acted like it wanted to start but still no start

which would you check first and best way to check Thanks