Recent Content by jared1

I had 4. 10 gears in my 2 wheel drive 2500 and got about 18 mpg until I changed to 3. 55 gears, now between 20- 22 mpg empty

I had a 95 auto it did the same thing, was real weak on hills ect. it also smoked alot on cold mornings. I had my valve lash adjusted and the power differance was like day and night, the timing , air and fuel filters should also be checked

just put in a #6 tst plate in a 95 5 speed, would like to know what eveyone else is getting on boost and egts. Im getting 22 lbs with the plate, 18 stock. Also i think the govneor lever is wrong, the hieght is right on but the lever never hits the plate? Probably comes 1/16 " from the plate and...

I think i'll try the lighter spring and screw the adjustment in a little. I thought the governor lever was ok but i'll check it again. Would adjusting the valve lash and advancing the time help and bring the egt's down. need better air flow too!!!!

I adjusted the screw to just touching the diaphram, will it make that much differance to screw it in one or two turns?

the truck is a 98 5 speed, 215 hp have gauges and get 30# max the afc housing is all the way forward. the plate is a bully dog plate rated at 285hp the star wheel is backed off about 12 clicks from nothing. the afc spring that i put in was the medium one. No matter where you put the star wheel I...

just put a equal plate to the #11 in a 98, forward 1/16" and afc sping kit. Was not impressed with the power increase!!!!!! I messed with the star wheel 5-6 times and still couldnt get it where i thought it should be. Are there any more adjustments or little fixes that anybody knows about that...

My a/c quits at about 55mph, works great below that, hope I figure this out before I cook 96 2500, any answers?

this has probably been covered a million times, last time i just wiggled the vacuum lines and problem was solved. this time it didnt work any ideas? both abs and brake lights wont go out thanks

I know ive seen this on here before but cant find it. how deep should the probe go into the manifold? got the isspro EVs thanks

does anybody have theDC part# for the light gray interior paint?

Ive got 235s on my truck it will also change the speedo about 4-5%

I replaced mine with 6. 5 component speakers from Crutchfield. All of the 6x9s that I lloked at were to deep to fit in the factory holes. The problem is the window hitting the magnet on the way down. dont think you can fit anything deeper than 2 3/4"

has anyone used Bully Dog plates or injectors? how to they compare to the others? My truck is a 96 215hp 5speed

my truck has the five speed,the pump has been turned up but the stock cam plate has not been moved. I dont really understand what the mechanic did but it worked. somthing abou recalibration, spillport time? anyway talked to him yesterday about more power and he recomended bigger injector...