Recent Content by JoshWoodruff

Devil Dog We are building twins, several different setups offered very good pricing. Also building a street triple charger setup. Check out our website www.woodruffdiesel.com for prices and pictures the phone # is on there if you have any questions. There is a picture of the twins on our site...

Right ,Sled Puller, some one who agrees with me you dont have to have 13mm plungers to make power. The 215 pump is a good street pump and can make power, but the 160 and 180 pump plunger design is better for a competition pump does a great job with the camshaft out of a 913 pump. If you need...

Ryan B Sounds good to me, have you considered a roller billet camshaft great for street competition pullers. Don't have to knock very much compression out to go roller. The price$ is a little scary compared to a intermediate grind camshaft. The girdle is a great idea, keep those 2 and 5 main...

Cooker I didnt mean it was a problem with the pump only a problem when trying to get max fuel with out running excessive timming. To get the max fuel out of the p bosch still using a 12mm plunger, the older plungers are better for that. there is machine work that can be done to the plunger...

The problem with the 215 pump is the plunger, unlike the older pumps the 215 has a retard notch in the plunger. If you make the rack travel too far the pump begans to retrard and you have to make up for it with timming. The good thing with the 215 pump is the driveshaft better than the pumps...

If you say you live out in the country and you only drive it to work every day not on trips or use the truck to haul or make your living, I dont see why you couldn't make it work. You will have to learn to drive it and shift it not the most user friendly but I think you could make it work. I...

The Mitchell clutch is great, I have had nothing but good results out of them. I sell EEP clutches and others too. I have a double disc with a . 330 floater plate and 12 pads per side. It uses the same pressure plate as a south bend clutch that can be set up to any plate load you would like can...

I am a dealer for both Suncoast and ATS, both converters are great depending on the stall speed you are wanting and what you plan to do with the truck you can't go wrong. I have put four ATS five star converters in trucks that are daily drivers in between 300-500 HP. Its got its own feel to it...