Recent Content by peteweb

If you have any mods to your track bar (ie, Lukes Link) or a MagHytek diff cover, it may rub up against or hit the front diff cover when you go over a bump, especially when the wheel is turned. Check to see if there are any wear marks on the front differential cover. Good luck

Thanks so much. Its nice to know that it isnt somrthing that will cost me a fortune later down the road. I really appreciate all of your help. TDR is the BEST:D

so the heater core is inside the cab? I had just topped off the radiator come to think of it. It seems strange but I guess I wont worry about it. Thanks

let us know how it works out Thanks

yeah, I have allready checked for that. The noise is coming from inside the cab behind the glove box.

My APPS is dead as well. It has been failing for some time and I have been keeping my eye on the threads for APPS/TPS problems. Here is what I have learned: 1) The 24v sensor is an APPS. The 12v sensor is a TPS. The TPS sensors are cheap and you can get them from Cummins or NAPA. The APPS...

Here is a strange problem that I hope someone can help me with. When I start the truck up, for the first couple of minutes there is a gurggling/bubbling noise that is coming from behind the glove box. It sounds like there is some kind of fluid in the black plastic ducts in there. The bubbling...

same with my truck. I got an alignment the next day and it works great.

yeah I will, it will probably be around 10 or 11 here so 1 or 2 pm in fl. I would love to get this fixed Thanks Pete

I have the same problem with my tps/apps on my 24v. I will go out tomorrow to take a look at the wireing but am not very electrically inclined so I may have to ask a few questions. I will let you know what I find.

yeah, I have reset a couple of times, it helps a little for a week or so and then goes bach to the same old thing, in and out of O/D and the gears at 43-50 mph. It is driving me nuts. I think that I will just have to pay up:{

I have seen some old threads that takl about opening it up and cleaning it but it looked pretty involved.

That sucks! I need a new apps and am trying to find anyplace to sell me one under the $600 dealer price. . If anyone knows of somwhere reasonable to buy one let me know. It sucks that you have to buy the whole assembly to get a little sensor.

Has anyone had any experience with replacing the APPS on a 98. 5 with the one from Napa (just the sensor not the whole throttle assembly that you get fron the dealer). I really dont want to spend $400 on an entire assembly when the only problem is a bad pot. I dont know if I want to experiment...

I have been having problems with my reverse lights as of late. They work sometimes, but in the past few weeks they hardly ever work. They seem to work and then flicker on and off as im backing up. They both do it at the same time so it is not the bulbs. I have checked the switch at the trans...