Search Results for Query: *

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. jgruberman

    Gear Ratio Error in 4th, 3rd and 2nd

    Well I ended up having it towed to a shop(their cost) and they asked me a handful of questions when I first called. He asked what I did with it, how much extra power I'm getting with my tune and recommended he rebuild it with some beefier parts. He mentioned some I'd read about(I forget what...
  2. jgruberman

    Gear Ratio Error in 4th, 3rd and 2nd

    Since owning the truck, I haven't touched the transmission unfortunately so nothing aftermarket or filter work done RevMax? How much did your Aisin cost to get installed? I have a local shop quoting $4500 for a rebuild including upgraded parts for the tow/tune
  3. jgruberman

    Gear Ratio Error in 4th, 3rd and 2nd

    Thank you for the info! I did check fluid and unfortunately, it's fine. I'm starting to think there is something wrong with the clutch itself only because of the intermittent slipping(I assume that's what Incorrect Gear Ratio means) in gears 2-4. Most of my driving lately is taking my 22'...
  4. jgruberman

    Gear Ratio Error in 4th, 3rd and 2nd

    Yesterday out of nowhere I threw a CEL P0732(Gear Ratio Error in 2nd) and the truck went into limp mode. I did a one time reset and of course it came back. I also got P0734("" in 4th) and P0733("" in 3rd) today after driving it gently a bit. I have a tuned truck, and do a decent amount of boat...
  5. jgruberman

    14 2500 in Limp Mode

    I ended up reflashing a different companies(more reliable) tune and so far no issues. I am still stuck with the Incorrect Gear Ratio DTC's on gears 2, 3 and 4 however.
  6. jgruberman

    14 2500 in Limp Mode

    Fully understand this, thank you.
  7. jgruberman

    14 2500 in Limp Mode

    Thanks for the information(images removed for the brevity of reply message). Are you reading these from a specific app? I have used a lot of error code apps and I like the way the information is presented in this one. I will take a look at all the plugs and electrical connections, etc.
  8. jgruberman

    14 2500 in Limp Mode

    Thanks for the clarification
  9. jgruberman

    14 2500 in Limp Mode

    Sure, that's perfectly understandable. I'm relatively new to deleting/tuning outside of the work I did a year or two ago for the initial delete/tune so just wanted to make sure I understood what was being told to me. I do understand what you are telling me though, so thank you for that. Are...
  10. jgruberman

    14 2500 in Limp Mode

    I want to make sure I understand this scenario, so please don't interpret my response as anger, it's not in the slightest. With three different people here all chiming in and wishing me luck on this issue, does that mean that I won't get any help for this issue here, presumably because of the...
  11. jgruberman

    14 2500 in Limp Mode

    So at this point, you guys are thinking my only option is to get back with the shop that the tune was done by? Anything I can check by chance? Just seems weird to happen out of nowhere, to what I think aren't even sensors connected in the truck right now.
  12. jgruberman

    14 2500 in Limp Mode

    If it reverts back to stock, wouldn't the truck then require all of those sensors to be plugged in?
  13. jgruberman

    14 2500 in Limp Mode

    I have a 2014 6.7L both EGR and DPF deleted but today out of the blue today I got a P0472(Exhaust Pressure Sensor A Circuit Low) and a U029D(Lost Communication with NOX Sensor 'A'). Then the truck went into limp mode and I had a heck of a time getting home. Aren't both of the sensors involved...
  14. jgruberman

    EGR/DPF Question

    I think I'm looking for the most straightforward way to tune it without potentially messing something up :)
  15. jgruberman

    EGR/DPF Question

    So for example, something like this(https://www.amazon.com/MM3-Tuner-Compatible-2013-2018-Cummins/dp/B07L6Q8LWY/ref=sr_1_1?keywords=mm3+tuner&qid=1568505205&s=gateway&sr=8-1) would be both the programmer and I assume have the programming on the SD card ready to load to the truck? (Just to make...
  16. jgruberman

    EGR/DPF Question

    What is WARP? Is that the name of the tune package, or one by a certain person?
  17. jgruberman

    EGR/DPF Question

    Thank you for bringing this up. It sounds like EFILive is one option, what are the other options?
  18. jgruberman

    EGR/DPF Question

    About 120k miles Yes I was definitely aware that I needed the tuner, just wasn't sure which(if I was to do it myself). Was really looking for some info on what tuner to use, etc... Also, why would I have to remove the DEF tank if it's not in use anymore?
  19. jgruberman

    EGR/DPF Question

    I understand that, and I've already gotten some good information. My DEF Pump has gone out and I have 135miles to Limp Mode, so trying to avoid literally "putting some miles on the truck". The shop I spoke with also was very helpful over the phone, however I appreciate you chiming in and letting...
  20. jgruberman

    EGR/DPF Question

    I will reach out to them also. I'm sure the original shop could answer my question but they're closed today and figured I'd reach out to the masses that have already done it for advice. I wouldn't mind obtaining a tuner also, but not sure which one. I was debating paying a down payment for a...
Back
Top