Search Results for Query: *

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
  1. A

    Xenon lights flashing 3 times and shutting of

    I pulled whole kit capacitors ballasts anti flicker capacitors bulbs after finding out that the total integrated power module has a printed circuit board which also feeds both right and left headlights. Bought a rebuilt circuit board 675.00 at Maks TIPM rebuilders already programed (TIPM...
  2. A

    Xenon lights flashing 3 times and shutting of

    Been there done that.......Wasn't happy with the results
  3. A

    HID and DRL

    Xenon pros with everything, capacitors, ballasts with harnesses and bulbs. I spend and hour on the phone with their tech support people. adding resistors was one of my questions and I was told that my pickup was rejecting them. I understand that the system needs to see feed back at least a...
  4. A

    Xenon lights flashing 3 times and shutting of

    Hello I installed a set of Xenon Pro lights and related wiring and capacitors ect. When I turned them on they worked ok then after I installed the Lights. I turned them back on it started flashing (3 times) so I pulled it back apart checked connections grounds voltages 12.8 took the anti-flicker...
  5. A

    retired moved to Florida

    retired moved to Florida
  6. A

    HID and DRL

    Sorry to break in I tried running HIDs, Bought Xenonpros and after a hour long discussion was told that my 06 ram was rejecting them their reply not mine. I have no daytime running lights, no auto lights. I find it hard to believe its not like a heart or kidney transplant ya know 12volts and a...
  7. A

    48RE shift concerns

    Two years ago I lost the 2nd band , direct drum, spread debris all through the trans and cooler. Pulled trans and overhauled it replacing the drum and using a billet 2nd band. I bought a sonnex valve body 47 re converted to work in a 06 48re I have no problems other than the 1-2 a slide and...
  8. A

    How many miles on your 3rd gen injectors?

    237.300 miles 7073 hours still gets a quart of marvel mystery oil and power service every two or three tanks
  9. A

    Granite sanding plate?

    320 / 400 grit was shown this trick by a old transmission man. just keep the paper clean, I've fixed many 727 C6,4 valve bodys,governors usually when a valve bodys are warped the vb bolts are not tightened in a sequence, I start in the middle and work my way out works for me. And always clean the...
  10. A

    Granite sanding plate?

    A flat piece of glass and 320 wet dry is what I used,with a little solvent then check with a machinists straight edge
  11. A

    How many miles on your 3rd gen injectors?

    215.500 just a shot howles additive every other tank still the originals
  12. A

    Yet Another Transmission Thread - 48re shift issues and more

    Is the intermediate band adjusted correctly tighten to 72 inch pounds back off 2 turns? I set back mine off 1.5 turns if the band to loose or stretched will cause a flare going into 3rd and a clunk on 3-2 downshift just a thought
Back
Top