Search Results for Query: *

Give PDR a call: PDR Diesel Inc. The turbo diesel performance specialists! - Twin Turbos Their towing twins consist of a 35/3b setup. You might need to run an external wastegate although I'm not 100% sure.

Here's a post he made on another forum regarding the head, hope this helps "The CR head really wasnt that bad to install, The connector tubes have to be from a CR motor, but they are larger and have the screen in them still. This is nice because they flow more and still retain the...

By JET FUEL, are you taking about aviation diesel fuel (blue diesel)? If so, I've heard that aviation diesel has less lubricants than regular low sulfer diesel... . ? Might be a bad idea.

The bell turbo is from Stockton, Ca... ... . ?

Thanks, I'm probably going to end up borrowing from someone with a identical truck (year and trans (SOVP & HOVP)

Have a 02 (3500 auto 2wd), that might have a ECM problem. My buddy has a 99 that is willing to lend me his ECM, to see if it solve's the problem. Will a ECM off of a 99 (2500 auto 4x4) work? I know the output on these engines are different (99=215hp,02=235hp) Thanks in advance for any...

Well, I finally started the truck again just to move it. It started right up with an occasional miss but nothing as bad as before with the dirty fuel. Drove off the driveway and once I hit the street, the truck wouldn't miss and drove just like new. I must have gone out for about 4-5 miles...

I'm thinking about doing this swap. My question is how much can my original motor go for? 02 standard output 110k miles, stock (no rust, South Florida motor) It works fine, just want something different... ... and higher hp:-laf

Thought you all would like to also take a look at this one: eBay Motors: Dodge : Ram 3500 (item 120203262518 end time Jan-03-08 17:20:57 PST) I came across this a day after reading this thread.

Air box..... Do you mean the air filter..... ? If it's the one behind the air filter, then it should be the PCM. It's bolted onto the firewall (passenger side) and not on the motor. If it is mounted on the motor, then it's the ECM. On the driver's side under the fuel filter canister...

I've never heard of anyone interested in doing that swap. It would be like swapping out a 12v for a 24v (vp44). I've just heard of more than a couple blown motors (6. 7L) at my local dealer. Your best bet would be a 24v common rail (5. 9L, 03-07), if you like the electronics and would like a...

I'm not 100% on this but I think the 01-02 trucks only have a camshaft position sensor... ... . ? It might be the 98. 5-99 or 00 that have both a cam and crankshaft position sensor. If not, someone please correct me.

Honestly, I would look into a 5. 9 CR instead. I have a buddy that works at the local dodge dealer and he told me that since the common rail first came out in 03, he replaced 8 engine's. In the first four month's of the 6. 7, he had replaced 5 engine's. Basically if you plan on keeping it for...

I recently bought a fass 150 system and like the whole package. Some might tell you that there loud, that may be the case with the older models but mine makes hardly any noise. Now if I had to do it again, I would buy an Airdog instead. I've heard that fass has horrible customer service and...

I was wondering, did your RAD box also come with a top speed eliminator? I found this one: https://www.xtremediesel.com/index.asp?PageAction=VIEWPROD&ProdID=589 And I wasn't sure if this also got rid of torque management.

Thanks for the responses, So now that the truck is running with clean fuel, it doesn’t miss as often as it did before. I really wouldn’t feel bad if I replaced the vp and it didn’t fix the problem. Just the fact that it’s the original pump with 110k miles and it ran with contaminated fuel...

We'll see how this works out, I plan on running this with a SB and mach 6Oo.

I'm not sure of the time period, because he's a truck driver and he's usually gone for about a week. Most of the time, the truck stay's at the truck yard sitting for week's sometimes. I"m not sure but I beleive he told me once that the filter had so much debri, that he had to take the filter...

I will get a scanner and have the injectors checked. I'll see what the scanner reads tomorrow. Thanks again,