Search Results for Query: *

Does kill the engine just lugs it down.

06 mega cab diesel passenger rear door wont unlock and the cab light wont come on with that door. Windshield wipers wont park, and torque converter locks up at idle. Is their a power train control module that controls all of that everything except wipers just started happening.

If you keep the rpm above 1000 it runs smooth and is snappy but from 900-1100 it is sluggish below 900 it dies.

Eletric pump is because we have a 225 gallon tank behind cab that has veggie oil in it. And I know about the grid heaters and if you are cranking and then spray you are fine as the airflow keeps the heaters below temp to ignite starting fluid. No the sequence I stated above is in the garage in...

I'm having trouble with my 95 12v p pump. After starting fluid is used it start and runs great above 1000rpm anything under 900 it is sluggish till 1100 then snappy 18° of advance on the pump. High pressure eletric pump feeding lift pump, heater eliminated checked all return lines and fittings...

water in oil That would be great thanks for being so kind! Rod

A friend last year put a new front clip on my 98 12v and forgot he put just water in the new radiator it froze and broke the oilcooler cover we replaced that but if you fill it with water it goes into the pan is there any internal freeze plugs that could pop out and allow water in the oil?

I had a friend work on my 98 12v he forgot he topped it off with water and set it out side last winter got it running this summer oil spraying from underneath it had frozen and broke the oil filter cover over the oil cooler bought a new one and a gasket set filled it with water ,pan is full of...

Injection pump hadnt been touched in 120k miles

hi idle warm up some one make a kit or good plans i would love this on my truck!

i used it and it fixed my tps lockup problem!

I am looking for chain, both gears and the big shift collar (2 and 4wheel shifter) for an 98, 1 ton, 5 speed, 421 dhd transfer case. Brian 308-458-2411.

well i didnt get the original motor and trans when i got it( m8b) in pieces didnt have the extra 50 grand so it has a 430 inch big alluminium small block. a two wheel drive suburban would be a piece of cake! rod

summit j mcoy do you have the summit part# and is it for dodge i cant find one specific just universal?

my switch must be burned as my dash lights turn off but the head lighs dont also high beam doesnt work either and the high beam idicator light doesnt go out it get dimmer and then brighter when i pull swich back to activate high beams. im going to put separate relays to take the load i have...

i have a 98 ram 3/4 ton quad cab the relay is welded shut and the lights are staying on i have to pull the fuse out to turn them off i bought a new relay and have looked for about 2 hours and still cant find it looked under dash around steering columb, in fuse panel in fuse relay center under...

the bd filter did the trick for a awhile i was having a noise issue but it came back after about two weeks a little different so i had two problems noise and tp sensor i installed one of these and cured it! thanks guys! 1st/2nd Generation Dodge OverDrive Kit *91. 5-98 12v* [DNR] - $37. 99 : Zen...

thanks! rod

thanks that does help greatly i hope my aftermarket is the same if not let me know the company that make that kit. rod

my 98 also wont shift out of first in low range it originally came w/ a np241 dhd but it broke the front u-joint and broke the tranfercase and someone put in a 241dld well the front joint broke again and took out the dld and i put a new np241dhd back in but i just noticed it wont shift anyone...