Search Results for Query: *

OK, so I was digging through the shop and I found a couple sets of injectors in a bag. Brand new... with no paperwork. My problem is that I can't cross reference the part numbers on them anywhere. Does anybody happen to know if/how I can find out what they go to? I know they are dodge (99...

The latest replacement, along with a ground wire has taken care of the problem so far. I still have the spare behind the seat just in case. Thanks to everybody for all your help. It is very much appreciated.

Maybe I should just mount the spare on the fire wall right next to the other one. Atleast than it would know it is not alone. And it would make it pretty easy to switch over when one burns out as well. The new one I picked up was from Napa, that is where we get most of our parts for the...

I ran the extra ground and so far so good. I ran the truck for about 7 hours today pushing snow and so far so good. Thanks for everybody's input!!

I replaced the voltage regulator that failed the other day with another used one and it is back up and going. This morning I picked up a new one to keep on hand. I am not sure where you got one for 12 bucks as mine cost more than twice that!! I was thinking of running a seperate ground wire...

Please forgive me as I am posting under my friends logon, but we are having some problems with the charging system on the above truck. Here is the scenario... a while back I was driving said truck and I noticed I was loosing power on the gauges... when I noticed it was probablly around 11...

i would suggest using black Delrin or black nylon for the bushing. the black material just looks better than the white and won't show dirt. when looking at the material properties in the McMaster-Carr catalog, the delrin is good up to around 185ºF and the nylon up to 200ºF. both are around...

there is a procedure in the FSM for splicing the frame. you cut the heads off the rivets at the joint behind the cab and drive out the rivets. when joining the new section of frame, the FSM recommends lining everything up and then match drilling thru both frame sections with a 9/16" bit...

there is a procedure in the FSM for "re-calibrating" the CC for when it overshoots.

I would definately be interested!

these guys rebuild steering boxes for $115: http://westtexasoffroad.homestead.com/hydrosteering.html i've heard good things about them from the offroad community, but have not yet used them myself. the next time i need a box rebuilt, i'll be sending it to them.

Kendall brand anti-slip additive from Napa. BEWARE: this stuff STINKS!! do not get it on your clothes or let the bottle sit inside of anything. usually, the guys at NAPA will wrap it in 3 or 4 bags to help seal the stink inside.

did you have to modify the '01 brackets to work in the 1996 cab? i'm looking to put a new seat in a '97 QC i've been working on... thanks!

it could also be the neutral safety switch in the transmission. the next time it does it, put the trans in Neutral and see if it starts. if it does, then either the switch is bad or the linkage needs adjustment.

http://www.peakantifreeze.com/fleetcharge.htm has anyone used this stuff before? is it OK for the Cummins? i recently picked some up at Tractor Supply Co. for around $9 a gallon. upon opening the jug, i noticed the stuff was "purpley-pink" in color! then, i noticed that it had a...

http://www.partsmikeparts.com/SlaveKit.htm i think it is the same as the brass Jeep fitting shown in the picture attached to the SS braided line. call Parts Mike and he should be able to help you out. you will then need to make up a SS bradied clutch line, but thats really easy with Aeroquip...

what body style is your truck? i recently had Classic Tube remake all of the lines (both fuel and brake) for a 1997 Ram 3500, Cummins, 4x4, ext cab, long bed in Stainless Steel. they have all of the patterns and should be able to make you a set if you have the same body style. if you call...

Has anyone seen an air bag system for the 2wd 1st gen? How about lowering components in general? I have a couple projects in mind, but am having a hard time finding any suspension parts for a 1st gen. 150, cummins, or otherwise. Any info would be great! Thanks!

Does anyone have any experience with the DTC P0252 code stated as "Injector Pump 1 rotor and cam performance"??? The MIL light came on in my truck a few days after replacing my first lift pump at 24k- I did this after installing a FPG and realizing that my factory one had been cutting in and...