Here I am

06 turn signal problems

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Westach Oil Pressure Gauge

Lorenz leveling kit w/ 22.5 Alcoa's

Status
Not open for further replies.
Have an odd problem with an 06 3500. The front left signal will not flash. Left rear flashes twice as fast. Front and Rear right side are fine. The left acts like the bulb is burned out. Flashes twice as fast in the rear and the cluster indicator. No light from the front though. Changed bulbs but no help. Checked fuses too. Thoughts?
 
Does the light flash with the hazard lights..... if so the circuit is good and the bulb is good... I than assume based on the wiring harness that its the PCM (computer that controls lighting). PCM might not be the correct term on the Dodge... but the computer that controls that circuit.....



Hope this helps. .
 
Jim, I forgot to add that part. The hazards do not flash that particular bulb. However when they are turned on the blinking of the back left light is returned to a normal rate and not the quick flash as though a bulb is burned out. Also if connected to a trailer with the factory harness the rapid flash rate continues on the left side only with the front left still not working.



I appreciate your help.
 
Status
Not open for further replies.
Back
Top