08 AN To 12 x 1.5mm Adapters, Who Wants Them?

[Evan A. Beck]

This is a spinoff from the big fuel line topic in this forum...

Apparently, Brandon said he can get 08 AN to 12 x 1. 5mm adapters made. So here's what I am asking: Who wants them? Let's take a poll here, and see how many guys want them.

Post if you are interested!

 

[Andy Redmond]

Slightly on topic:

I have interest in a price on M12*1. 5 mm by 17mm banjo bolt (male end) to male 1/4" flare/JIC

Thanks. .

 

[JR2]

Evan,
If this is the fitting that lets me put -8AN SS fuel line from the stock fuel line to the lift pump-filter-injection pump, then count me in. I would probably buy a set with hoses from Brandon. I am just assuming that he will be making hose sets once he gets the fittings.

------------------
John D. Rathert Jr.
*************************
01 2500 Forrest Green Sport SLT+ QC LWB 4x4 Auto 3. 54 rear end with all options avail. DC Nerf Bars, DC Grill Guard, DC mud flaps, Line-X bed liner, Leer 160XL Topper, Power Edge, EZ Edge, SPA Boost/EGT Gauge on pillar mount, DTT's tc/vb combo, 275 RV injectors, DD 4" Exhaust and a KN RE0880 where the air box use to be. New turbo (HX40), SS fuel lines and bigger injectors in planning stages... . See My Truck, Dads truck: 98. 5 3500 SLT QC LWB 4x4, Brother Truck: 92 W250 SLT CC LWB 4x4 (Dads old truck) Winter fun - 2000 Skidoo Summit 700
I am my own warranty station. ZOOM ZOOM
*************************

 

[Hicountry]

I agree with JR2. Count me in for fittings. I am going to go from pick up to injector pump this Spring Thanks for all the hard work!!

------------------
'98. 5, 2500, Red/Black, Quad Cab Long Bed, 4x4, 5spd, LineX, 285/75x16, 2" front lift, rear 5K lbs air bags, GUN RACKS, CB, VA box, boost elbow, PS boost mod, K&N, BD E-brake, modified rear brake valve, 9. 5' Jayco Camper, 20' Bayliner cabin cuddy, Yamaha IT490

 

[Blkdawdg]

I will take a set. I'm going to remove the stock filter location and move it to directly in front of my BG.

 

[Archive]

Count me in. #ad
#ad
#ad


------------------
2001 RAM H. O. 6Sp 2500 SLT 4x4 Quad Cab, 4Wheel Disc, 4. 10 Limited Slip, Fog Lights, Muffler removed, Silence Ring Gone,K&N RE-0880. Skyjacker 2. 5 lift.
THIS IS NOT A HOBBY. THIS IS AN ADDICTION!!!! MAINLINING DIESEL!!!!

 

[Vaughn MacKenzie]

Evan, put me down for 3 of them. . . to do both sides of the filter canister and the injection pump. What I do at the lift pump, all depends on what pump I go for (leaning toward Mallory).

Keep us posted on approximate price.

Vaughn

------------------
'01 2500 QC Shortbed 2wd, 6-speed, 3. 54LSD, Cab & Fog lamps, Camper & Tow Pkg.
BOMBed: RV injectors, PS Boost module, Amsoil air filter, straightpiped exh. , Aeroquip 3/8" fuel line w/tank mounted lift pump, AutoMeter Sport Comp gauges, Line-X'd, Amber turn signal conversion.
Mildly BOMBed Performance: 0-60 @ 10. 0 sec. ,
40-60 @ 5. 5 sec. ,
0-100 @ 24 sec.

 

[Brandon]

holy crap, well this is snoballing I guess this will be a go I gotta start doing the sweet talikin now, give us some numbers of 50 or 100 we dont want extras but we want enough, they are gonna be made of steel to and hogged out to the max

B... ... ... ... .

MM what about your guy doing the fittings like you said, what is our status
B

------------------
Danelle's Dodge

 

[csutton7]

in

 

[willyslover]

hey B you know my answer #ad
#ad

 

[kevin1]

Hey B you know the drill the only thing is I want to replace the whole system its all junk in my oppinion another DC lack of quality situation the more I look at this truck the more I want to tear it down to the bare frame and start over

------------------
2001. 5 ETH/DEE 4x4, DRW QC DD3's, EZ, HX40 machined out for more flow, Custom 4" exhaust turbo back staight pipe with 5" chrome tip in front of rear tires,spa's, mcleod clutch, fuel lines,mag hytech rear end cover,psycotty air system,relocated blow by bottle,Lucerix power heated mirrors,more to come

 

[metal tech]

count me in for 3.

AL

 

[Mopar-muscle]

hey guys , sorry been away from the board , had an excellent session with a fuel line yesterday that cured my 0 psi full throttle problem .

brandon , i have to send the guy a couple drawings this week . he can do bolts and more than likely those fittings for us , i have a shop locally that can anodize/plate them once they are finished and i/you get them , i'll get a price , if you can also , and have a shop there , get a price to duplicate the factory finish , think its gold irridate ???

but count me in for 3 ( a right angle swivel would be the best , but getting it in the correct direction and not leak is the concern . i guess a 90* swivel hose end is the way to go with a short straight fitting on the pump , but some of the areoquip fittings i have seen neck way down so the hose goes on easier , the socketless , though not as pretty as SS braid is better in this respect .

even though the stock lines and its size is doing the job for me presently .

[This message has been edited by Mopar-muscle (edited 03-25-2001). ]

 

[sport bike]

Brandon,Parker will make any fitting you want as long as your willing to pay. It would probably be cheaper to buy parkers 12mm-1/4npt for $10 and -8an-1/4npt $1. 90. That does the same thing. There also steel so you can drill them out to . 320".

John/SP

 

[work2muchplay2little]

Count me in. Gladly pay for a complete set of replacement lines from injector pump aft. Thanks for the hard work guys!

------------------
Kurt Voss
+++++++++++++++++++++++++1999 2500 24VCTD AUTO 4x4 QC LB Laramie SLT, Luverne stainless steel nerf bars, 3 piece bug deflector, mopar mud flaps, Line-X bedliner, unBOMBed... . yet

[This message has been edited by work2muchplay2little (edited 03-25-2001). ]

 

[rotohead]

Count me in too. I'm more interested in a kit from injector pump to tank with a replacement lift pump or secondary pump. A kit w/fittings, lines with a recommend on lift pump that I purchase on my own would be great too. Thanks for all the R&D.
Chuck

------------------
'98. 5 2500 QC ISB 4x4 SLT, Auto w/Transgo shiftkit, JRE 4" exhaust w/5"Tip, DD II's w/Module&Elbow, VA box, Rancho 9000's w/in cab adjust, Mag-Hytec trans&diff covers, Jacobs E-Brake w/BD autoloc, trans temp, boost & EGT gauges, 2Low Kit, Brite Box, Steel Horse Billet Grilles, AirBullDog hood induction system

 

[Brandon]

sportbike I think we can get them done for a little less than that, believe it or not, looks like csutton and myself are gonna do this more to come monday and tuesday, I think we are looking at maybe about 90 fittings, they will be cnc so easily re-run the program when needed
B

------------------
Danelle's Dodge

 

[Evan A. Beck]

I think at least 100 fittings need to be made. This fuel line thing seems to be catching on, and we don't want to come up short.

 

[Neal Cassady]

Put me down for 3.

Dave D

------------------
2001. 5 2500 QC, LB, 4x4, Auto, 3. 54, Everything but Leather, Bright Silver Metallic, ARE K Series, Diprocal EGT, Boost and Autometer transmission Temp(sensor in the line) in an Autometer Dash Pod, SW Fuel Pressure Gauge, Westin CPS Platinum Step Bars - Black on Stainless

[This message has been edited by Dave D (edited 03-25-2001). ]

 

[Jetson]

I need 3. I'm moving my lift pump down by the tank.

------------------
99 2500 QC, LWB, 5spd, 3. 54 limited slip, Intense Blue, 275HP Injectors
Tow Lite trailer
96 KTM 360 EXC
99 Durango 4x4 360cid